Hello Everyone. Hope you enjoyed reading the LAN to LAN tunnel blog series. Now lets read some interesting facts about Remote access VPN.
For this I have a computer somewhere on the internet using VPN client. Then Head end device an IOS router where this client will be terminating and behind router I have 10.1.1.0/24 local subnet that we want to access.
Please refer the following Diagram for more details-------
Now lets Look into some of the configuration aspects----
Now we will talk about the VPN client itself----
Software VPN Client Configuration
Add All the details like connection entry, Description, Host, Name, Password etc, as configured on hand end box.
To connect, double click on the Connection Entry as shown up in the screen shot.
Cisco IOS Debugs: Phase I Negotiation
Please refer the detailed debugs and step by step tunnel creation (Phase 1 and Phase 2)
Cisco IOS Debugs: Phase I.5 Negotiation (Basically X Auth )
Cisco IOS Debugs: Phase 2 Negotiation
That’s all from my side. In my next blog I will be discussing the VPN Client logs followed by some real time scenarios.
Please leave your comments, inputs and feedback and also let me know what do you want to see in future blogs.
Looking forward to your participation.
Appreciate your time.