Data Center and Cloud

ACI route leaking to L3out in different VRF

Hello all,I have a small ACI deployment with only 2 Leafs. What I want is to have "Isolated" subnets that are behind a firewall connected to my ACI (so traffic to those "Isolated" subnets has to pass through that firewall).To accomplish this, say I h...

Passing APIC-Cookie on subsequent API calls using requests in Python

I'm trying to write a python script that will help me with a project that I'm working on and I'm confused about what to do after I've logged into the APIC (stored my APIC-Cookie that I get in the initial login prompt). On subsequent requests, using ...

How to determine API load on an APIC

I have a controller which is very slow to respond via web GUI and I suspect that maybe one or more devops or ops teams is hammering it with API calls. Is there a way to quickly determine how much of the system resources are getting consumed by API c...

Resolved! N20-C6508 UCS 5108 Blade Svr AC Chassis/0 PSU/8 fans/0 fabric e

I have Cisco UCS 5108 and trying to install Cisco UCS 6324 Fabric Interconnect for the configuration purposes. I can't boot it normally. it's give ma message of non-supported.

Resolved! CIMC reset password

i have a ucs c220 working properly, but would like to access in cimc interface and i don't have the correct user and password. what is the best way to reset that?

ACI Automation Part 3 - ACI with Postman on Configuring Multiple EPG

I. IntroductionII. Create EPG SpreadsheetIII. Postman Collection Runner1. Collect the EPG Object Information from ACI API Inspector2. Upload the Spreadsheet to the Postman Collection Runner3. Enter the Iteration Accordingly4. Run the Collection Runne...

Nexus9000 guestshell iperf3 values issue

Hi All! I have one problem related to running GuestShell on Nexus 9000 I managed to successfully run guestshell and install iperf3. But when i start measuring channel bandwidth, it shows tiny values, the hundreds of kilobytes, while the real channel ...

Resolved! Can i run Cisco ACI Simulator or VM image on MAC OS using Fusion

Hi There Experts, Can i run Cisco ACI Simulator or VM image on MAC OS using Fusion?? Express your views or experience around it.

Cisco Compute Hyperconverged with Nutanix Standalone Field Guide

A Field Guide covering the installation and initial configuration of Cisco Compute Hyperconverged with Nutanix systems using Standalone Cisco UCS C-Series servers managed by Cisco Intersight. This guide is intended for technical training and educatio...

Will configuring unused port on Fabric add adapters for vNICs?

I'm absolutely new to UCS and I've inherited a system that is discontinued and out of support. I've been tasked with moving 40TB of data off this UCS/vSphere system and onto a newer system supported by our server team. (Server team is unfamiliar with...

ACI Fabric Metrics Collection and Visualization with Python Script

Purpose of script: This script collects metric count data from your ACI fabric using REST API calls and saves it to an Excel file on the local computer. It requires a CSV file as input, containing the IPs, usernames, passwords, and Fabric Names of...

Resolved! Disk Problems - Can we recover? (UCS C240 M4SX)

We have a UCS C240 M4SX that is out of coverage now (no contract) though the plan is to replace this with a new server, but for now we're stuck with it. The problem is, virtual disk 0 is down because we have 2 disks (1 and 2) that were in a predicted...

5 IOM replaced via RMA in 6 month...

IOMDCDateIOM 6/1 (A)A10.nov.2023IOM 3/1 (A)B09.jan.2024IOM 4/2 (B)A12.feb.2024IOM 6/2 (B)A21.feb.2024IOM 6/1 (A)A16.apr.2024Hello do you have any ideas about raisons what could cause multiple hardware IOM failure?Hardware is new, firmware are up to d...

UCS Spec for Cisco Molding Labs 2.7

Hi There I'm looking for a UCS Spec for Cisco Molding Labs 2.7 for 60 students to work simultaneously. looked for days but could not find the spec for my requirement. Any help is apricated Thank you

Resolved! Application Centric Infrastructure (ACI) L3-OUT + PBR

Hello,I have a problem with a client regarding L4-L7 (PBR) contracts that are not working properly.The customer today has 2 L3-Outs, both with OSPF configured, 1 L3-Out in Area Backbone and the other L3-Out in Area 0.0.0.1, as its neighbor (7K) alrea...