Hello, I'm working on an activity in packet tracer, and when I go into any of my devices and switch from static to DHCP, it shows a message stating, "DHCP failed. APIPA is being used."I had no idea what's wrong with my work; if anyone or someone can ...
Hi,before the changes that extended the recertification period for CCIE certifications to 3 years it used to be a 2 year recertification period, during which time you were considered 'active', followed by a 1 year period during which time you were co...
Now getting a similar but new error message when SNMP-ing for PS or fan status:SNMPv2-SMI::enterprises.9.9.826.2.1.20.120.1.4 = No Such Instance currently exists at this OIDSNMPv2-SMI::enterprises.9.9.826.2.1.20.52.1.10 = No Such Instance currently e...
When upgrading from 7.2.5 to 7.2.7 this bug is also occurring. I have two TAC cases open prior to finding the error message and this documented bug, so we'll see if I get a response.
Does anybody know if CSR 8000V with IOS XE 17.06.03a is also affected by this bug?I have severals flapping VPN tunnels and was wondering if this was the root cause.
IBM released 5.3.0.9 ipfilter does not completely fix the issue.Please refer to https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwj92795The problem is not specific to CSW Agent <-> CSW Cluster communications.It may affect any IP fragmented traffic to...
What is the cause of the problem? only: fia_driver[256]: %PLATFORM-CIH-5-ASIC_ERROR_SPECIAL_HANDLE : tcam[1]: An unexpected-err error has occurred causing halt-alert. KBP_CORE.Error_Status_Register.DBSoftError Do we need to take measures?
Looking for A9K-4T16GE-SE Visio Template. I CANNOT find it anywhere. Anyone that may have an old visio stencil file of it would be greatly appreciated.
Hello CISCO Community, I am experiencing a rather odd situation with our wireless environment. We have recently upgraded our wireless controllers, CISCO Catalyst 9800-40, to the 17.9.5. After this upgrade we started experiencing loss of associations ...
Hello,we currently have room bars set up in meeting room and are looking to implement Proximity.However I get a message that I need to accept when my laptop connects to the room bar over Proximity.The message states 'Could not verify device identity....
This is the command i type: r2(config)#Track 1 int g0/0/0 line-protocol and it gives me an invalid input at the track part. is there a different configuration mode I need to be in or is it unsupported? I tried this on both 4000 series routers and a 2...
Hi, I found a workaround in a FDM-V. This is a example > configure network management-interface enable eth0 firstboot and FTDonbox, setting internal route at /usr/local/sf/lib/perl/5.24.4/SF/NetworkConf/NetworkSettings.pm line 1198.Configuration upda...
hello,everyone! i am new in network.Recently I encountered an unsolvable problem. I searched all over cisco bugs but couldn't find a matching one. I would like to ask some experts for help. Thank you.Here is some information:SoftwareBIOS: version 5.0...