Technology and Support

End point detection

I am new to cisco endpoint and will need some help in creating rolling 3 months analysis for end point positive detectionsand also analysis for false positive detection.Any help and directions will be deeply appriciated.Thanks

Cisco ISE Guest Portal not loading on android phones only

Hi All, We have WLC9800 and Cisco ISE 3.3 . We have setup Guest WIFI with CWA on ISE. there is DACL(on ISE) and REDIRECT ACL(One WLC and ISE) has on been configured. All work perfectly for Windows and Iphone users. But for android user, the redirec...

Internal batteries

Does the Catalyst 2960-X or 350-P network switches have internal coin cell batteries to retain memory or clock settings? If so, what is the part number of this battery. Alternatively do you have a safety compliance document for the battery which allo...

Cisco ISE 3.2.0.542 External Identity Store Cert Auth via Proxy

We have implemented 802.1x with machine certificate authentication.The certificate validation is via OCSP and the question is does Cisco ISE support connection to OSCP via a Web Proxy? The assumption is that the connection would be using the system p...

Upcoming Event: Capture the Flag, get the Badge!

You asked, we heard you! Introducing the ThousandEyes Support Community Capture the Flag event from April 23rd at 8 AM PST to April 29th at 5 PM PST. This month the ThousandEyes Community is offering two Capture the Flag missions in a single upcoming...

HSRP Not Establishing but L2 Connectivity Verified

Replacing some old cisco routers with 8500's running 17.9.4a. They are connected to a Nexus 7K, on the same card. The routers can ping one another and establish BGP but they will not establish the HSRP adjacently across the 7K. If the 8500's are c...

Can ISE change a SSID name alias broadcast?

Cisco WLC 9800 is configured to broadcast a SSID alias as "Original_SSID", the WLC is configured with a ISE controller IP, but in the client computer we see the available SSID alias as "Other_SSID".We do not access to the ISE configuration, can the I...

Unable to ping between two tunnel points

Hello, I built using the packet tracer a simple topology of three routers with ospf routing. I created a tunnel between the two routers that are not physically connected to each other, but I can't ping between one end and the other. I managed to ping...

FMC cert expiration notification and catalyst jobs stuck "in progress"

Hello, we recently had our cert for our VPN expire without notification via alert message. I've done some research in the FMC but can't find anything that monitors certificate expiration dates. A google search points toward REST API's of course but t...

Script for Switches Cisco

Hello Community,I am looking a script for switches cisco for block interfaces with APs connected , the reason is because we receive daily port changes and sometimes the engineers change the vlan Wi-Fi by another and the Wi-Fi environment is affected ...

Possible? ASA 9.x run AAA with Cert and AAA only on same interface

Is it possible to run Radius with Cert and Radius only on the same interface. I have different profiles for the two. but they share the same tcp port. Need to do a POC, and it would be much easier to have user login with just Radius, not Radius and c...

Computers disconnect continuously from WiFi when in office

Our Customer is facing issue on their corporate SSID , We have capture debug and found below logs . Can anyone suggest what can be issue , currently WLC is on IOS 8.5.171.0 and access points connected AIR-CAP3702I-Z-K9.Debug logs apfMsConnTask_3: Apr...

SAML IdP Certificate Error for FTD Running 7.0.1 Managed by FDM

I can't seem to overcome the following error when configuring AnyConnect with SAML according to https://community.cisco.com/t5/security-knowledge-base/configure-anyconnect-with-saml-authentication-on-ftd-managed-via/ta-p/4467779:Deployment Failed: Us...

A question about MAC addresses for access points

Can anybody tell me what exactly is the difference between the radio MAC address vs the ethernet and Wi-Fi mac addresses? What is the purpose of the radio MAC address? Apparently, wireless access points don't just have an ethernet and Wi-Fi MAC, but ...

ISE 3.2 Repeat Count Details

Hi,on ISE 2.4 in the live logs pages the report that one got clicking on the repeat counter was very useful because the endpoints were sorted by repeat counters. So it was very easy to find the endpoints with high repeated counters.With ISE 3.2 the r...

Technology and Support

Browse the Community

Certified Remanufactured Equipment

Cisco Software

Cisco Start

Collaboration

DevNet Hub

Data Center and Cloud

Internet of Things (IoT)

Networking

Online Tools and Resources

Security

Service Providers

Services

Small Business Support Community

Wireless - Mobility