Activity in Wireless - Mobility
9800, mDNS: can flex AP cach a wired mDNS record from the central WLC?
Anyone know if it is possible for a flex AP to cach wired mDNS that has been centrally learned on the WLC? Or does this only work when the AP is in local mode?
Bonjour Service (mDNS) for wired and wireless devices
We have wireless and wired devices that uses Bonjour (mDNS) service to discover each other. I need to configure both wired and wireless devices in the same VLAN . We have Cisco WLC 5520 and APs that support flexconnect feature. I need to configure AP...
client not able to connect to 9800 wlc-wireless
Hello Team,we are using new 9800 wlc in our infraWLC-9800/ios-17.9.4aAP-Mode:Flex-connect AAA server-iseAll of sudden all clients from one particular not able to connect to wireless -corporate ssid.Clients struck in 802.1x state and error is 2024/03/...
Not clear about different AP modes
Here is a question. Different people are giving different answers. Can someone please chime in?Thanks
Resolved! RRM Power on 6GHz not match between IOS version 17.9.4a and 17.12.3
I've migrated one pair of 9800-80 from 17.9.4a to 17.12.3. I noticed that the APs w/ RRM on the new 17.12.3 on 6GHz have drop drastically up to 8 dBm (see attched picture). Is anyone aware of this change and why on 17.12.3?
Cisco 2500 Wireless Controller, limit bandwidth for WLANs
Hello!I need help, I have a problem with limiting the speed for connections on a guest network. I've already studied the manual several times, but I can't figure out if there are any such settings on the Cisco 2504 Wireless Controller, Product Versio...
Cisco WLC upgrade
Hello! I have configured WLC with software version 8.8.130.0. To which version is it recommended to upgrade? Thank you!
C9800-80 in HA cannot install APSP6
Hello everyone,I'm trying to figure out a frustrating issue. Attempting an install of APSP6 keeps bombing out and I'm unsure what steps to take next. Software: Version 17.09.04aROM: 17.3(3r)Error in question: Dec 13 21:21:01 Eastern: %INSTALL-3-OPER...
AP issue
Hello we have a local 9120axi AP with a 9800LC WLC that seems to be losing connection. The AP is in flex connect, all config looks fine: AdvancedCountry CodeUS Multiple CountriesUSStatistics Timer180CAPWAP MTU1485AP Link LatencyEnabledAP PMK Propaga...
Resolved! C9120AXI-E EWC license
Hi,if I want to use 2 x C9120AXI-E with Embedded Wireless Controller for redundancy what license do I need? regards
Temporary loss of WIFi connection between handheld terminal and AP
Hello,We got new terminals Honeywell EDA61K, but we have a problem with connection loss.Wireless LAN Controller is Aironet 2800 Series ME. Terminals randomly lose connection. After a while he returns.I switched the WiFi network only to 2.4. This redu...
Resolved! Why, when AP joins EWC, the AP gets an EWC image
Hi all,This is my first time working with EWC, and I'm a bit confused about the joining process of the access point.First, here are the hardware components I'm working with:Access Point: C9120AXE-EEWC: C9130AXE-EWC-EVersion: 17.9.4aI don't understand...
CMX - cmxadmin password recovery 11.0
I am following this document to recover and reset the password for "cmxadmin" https://www.cisco.com/c/en/us/td/docs/wireless/mse/11-0-1/cmx-config/b_cg_cmx1101/performing_administrative_tasks.html#id_131101 When I reset my VM Server and edit ("e") in...
Does the IW9167E wireless AP comply with the SIL2 Secure Rate Wireless
Does the iw9167e wireless AP comply with the SIL2 Secure Rate Wireless？If not, which Cisco AP products are certified?
Equivalent Command for 9800
A simple question....If I just knew where to find the answer:Doing MAC authentication on an 5520 WLC, I can see the MAC addresses accepted by the WLC if I issue the command:"sho macfilter summary"Can anyone tell me the equivalent command on a 9800 (y...
| User | Helpful Count |
|---|---|
| 79 | |
| 34 | |
| 23 | |
| 12 | |
| 10 |
