Technology and Support

Meet and connect with other members who use Cisco Technology
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Browse the Community

Cisco Software

Cisco Software training materials and resources for Enterprise Agreements, Smart licensing and Smart...

3932 Posts

Cisco Start

Engage with your peers and Cisco about enterprise-class technology tailored to small and medium-size...

235 Posts

Collaboration

Engage with your peers and Cisco about collaboration products such as contact center, IP telephony, ...

214094 Posts

DevNet Hub

Connect with other Cisco technology experts on developing tools for collaboration, networking, secur...

27015 Posts

Data Center and Cloud

Professionals using or considering Cisco data center technologies can join the conversation to discu...

42036 Posts

Internet of Things (IoT)

Collaborate with your peers and Cisco on all areas of IoT to discuss what happens when the internet ...

209 Posts

Networking

Collaborate with peers and Cisco on all aspects of your network, including Cisco Digital Network Arc...

282908 Posts

Online Tools and Resources

Find tools and resources to streamline your service and parts logistics questions, technical documen...

7635 Posts

Security

Explore the security forums and share your expertise about firewalls, email and web security, Identi...

192222 Posts

Service Providers

Explore information and join discussions with peers and Cisco about Next-Generation Internet, MPLS, ...

16884 Posts

Services

Interact with peers and Cisco about Cisco Services including design, analytics, CSR and ServiceGrid,...

5289 Posts

Wireless - Mobility

Connect with peers and Cisco on all aspects of wireless tech including security and network manageme...

56200 Posts

Activity in Technology and Support

Catalyst 3580 to 9300 Migration

Hi All , I am in the testing phase of migrating to a 9300. So far I have done the below.3850 running 16.3.6   and 9300 updated 17.09.04aI have copied the start-up config to the 9300 - all looks ok apart from the usual ip routes , some interfaces not ...

machine23 by Level 1
  • 0 Views
  • 0 replies
  • 0 Helpful votes

Dot1x Configuration in WS-C2960X-24TS-LL

I have Configured the 802.1x Configuration in WS-C2960X-24TS-LL Switch Globally. when i test the aaa test it was successful. but when i tried to configure in the Interface the authentication was not happening. so can you please help to configure the ...

IOS Patch Image failed to be Installed.

Hello Team,I'm facing a challenge to apply a patch on the Cisco ISR4331. See the below error message from the router. SIMBA-RT#install add file bootflash:isr4300_cpld_update_v2.0.SPA.bin activate commitinstall_add_activate_commit: START Wed Mar 27 11...

dissai by Level 1
  • 102 Views
  • 6 replies
  • 0 Helpful votes

Upgrade from SNS-3595-K9 to SNS-3795-K9

Hello, I have two ISE 3595 (3.2 Patch 3) physical appliances, one in each Data Centre. They will be end-of-life in a few months. They are currently used for Wired NAC with Posturing, Wireless NAC (corporate, BYOD and Guest and Hotspot). It is also us...

Resolved! Cisco Prime Collaboration

Dear, before when we have CUCM IP telephony solution. we used to use "Cisco Prime Collaboration" to do "Provision, Assurance & Analytics" for the Cisco Voice Solution. As of today what is Cisco new product which address the End of Sale "Cisco Prime C...

IPSec tunnel encrypt packts but no decrypt

Hi Community, We have a newly established IKEV 1 tunnel from Cisco ASA to AWS. This tunnel is currently at up state but the traffic is not passing through the tunnel. When we enter the show command "show crypto ipsec sa peer X.X.X.X" output have enca...

naveen98 by Level 1
  • 91 Views
  • 4 replies
  • 0 Helpful votes

Resolved! Access Point

Hi all, can the cisco catalyst AP model 9136I, act as Autonomous.

CISCO C1111-4P software upgrade path

I have a C1111-4P router with c1100-universalk9.17.06.01a.SPA.bin image loaded, I want to update to c1100 universalk9.17.13.01a.SPA.So can I update directly to a new image or need to update any intermediate?

fti-it by Level 1
  • 58 Views
  • 1 replies
  • 0 Helpful votes

ANSIBLE BACKUP ON CISCO

Hello Guys,Below playbook is not working, kindly assist look into it and advise. Thanks.Getting below error :-What could I be doing wrong?

fmugambi_0-1711445454310.png fmugambi_1-1711445510456.png
fmugambi by Spotlight
  • 391 Views
  • 14 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Share your Expertise

Level up by answering questions in your area of expertise.