Hi, I have a DNAC Server gen 2, configuration with 2 SDA Fabric Site. I managed about 215 Devices (included Fusion Router, Border Switch, Intermediary Switch, Edge Switch, WLC and AP). I doing a full backup but size is so big (~ 213 GB), backup progr...
Hi All. I would like to get your thoughts on the following issue i have been facing since implementing Dual ISP and failover for site-to-site vpn tunnels.Hub Site:ASA5515 using 9.6(4)42Spoke sites:Cisco ISRs using 15.1(4)M8, using voip services over ...
I have a requirement for VPN with MFA for a subset of users, while protecting the other users from Spray attacks. Scenario: Customer is currently implementing VPN with MFA for a defined set of users (1/3 of staff)Most users do NOT have a requiremen...
I'm hoping I can explain this clearly enough. I have a remote site with a site-to-site tunnel. From the Home Office and the remote site, we are allowing a split tunnel, but we need to tunnel a specific external site via the home office.The IP Scope f...
I'm not able to ssh to devnetsandboxiosxe.cisco.com. I'm using the following command in Linux ssh admin@devnetsandboxiosxe.cisco.com. The response is...kex_exchange_identification: Connection closed by the remote hostConnection closed by 131.226.217....
Hello,I have a new install with Codec EQ with quad cam, and quite often, the audio coming out of the speakers from the quad cam drops and is very low, even if the volume is at 100%.Does anyone have this issue?Thank you
I work for a large company. We have many iPads used for scheduling zoom room meetings and they are all on the same SSID at all locations. These iPads will go through a stretch of having a solid connection then all of the sudden many office will start...
Hello Everyone, I am contacting you all because i don't seem to find the needed information to resolve my issues, even though there are many similar topic as mine with the same error.We have an infrastructure using FTD ASA5506 with switch CISCO WS-C2...
Hello, I have seen in several places this commands as best practice. Are they still needed/helpful ? -epm logging-logging host <ISE_IP_address_x> transport udp port 20514-epm access-control open or access-session acl default passthrough -device class...
Hello,I did a factory reset in my cisco switch 9200L 48 PoE, but after doing that, it seems the switch require to install new OS and there is no copy OS in flash memory. When I try to connect external USB it doesn't respond. What should I do?Here is ...
Running Window 10 fully patched and I've installed Secure Client on a bunch of our users machines. Things seems to work for the most part, but there is an annoying behavior that I can't seem to find the cause of. Randomly, multiple times a day, the S...
Hello Professionals,I have configured Archive to log config whenever type write memory.I would like to use this auto backup in other way too.Could anyone tell me how to configure followings?1. Is there possible to backup config whenever I make any ch...
We recently got several VG320 and VG310 and just deployed but I see the link these hardware are expired.End-of-Sale and End-of-Life Announcement for the Cisco Voice Gateway VG320-EM and VG310-EMAre VG320-EM and VG320 are the same hardware and already...