Activity in Service Providers
Pseudowire over XRd not working?
Hi, We´ve been using XRd as a way to do integration testing with our autoprovisioning platform using gnmi.This works great.However I'm currently trying to do end to end testing of the whole solution with actual traffic forwarding across the finished ...
Resolved! NCS-55A1-24H safe upgrade path from 6.6.3 version
Hi everyone,I tried to upgrade IOS-XR from the 6.6.3 version to version 7.6.2 on NCS-55A1-24H and the upgrade failed. I presume that upgrading to version 7.6.2 requires upgrades to lower versions of 7.x IOS-XR as a first step. If that's correct, I wo...
Resolved! PCIE Uncorrectable Fatal Error/Surprise Link Down Error on Tomahawk LC
Hello,I have NCS5501 that I get the PCIE Uncorrectable Fatal Error/Surprise Link Down Error on Tomahawk LC. I am trying to look it up to gain a better understanding of what this is. Anyone ever seen this before? Can you clarify what it is refe...
Resolved! SR TE policy is down in IOS-XR
Hi, I have configured SRTE policy on one NCS6K-1(head-end) to other NCS6K-2's(tail-end) loopback address. I have tried both the static policy and dynamic policy as well. Both are not working fine. Here are the quick SR-Configs and ISIS configs. Pleas...
Resolved! NCS-55A1 32-bit IOS-XR
Hi everyone,I would like to know whether NCS-55A1-24H can run 32-bit IOS-XR. If yes, which versions?Many thanks!
Bidirectional Forwarding Detection Use cases
I have two routers with dual links between them with some layer 2 technologies in between, i am using IBGP ECMP to load-balance traffic between them, and I have ISIS as an underlying IGP for internal reachability. I would like to enable the BFD to de...
Aggregate Service Police on ASR1K
Hihere is the scenario.We are giving 3Gbps internet service to a user through 2 connection.there are 2 different vlan ids and 2 bgp peers with the user.we the serving the service on an ASR1002-HX and the vlans are coming through a port-channel with 2...
Cisco Validated Design for Scalable Public Web Hosting
Hi everyone, I'm hoping to leverage Cisco's validated designs for building a public web hosting service. Ideally, the solution would be: Cisco Validated Design: Based on Cisco's pre-configured and validated designs to ensure optimal performance and r...
Smart license
PID : N540-24Z8Q2C-M IOS-XR : 7.8.2 I want to know about smart licenses. The command is enable, but when I apply the command below, it behaves as if the license is off. RP/0/RP0/CPU0:PE-02#show run | inc licWed Mar 27 10:13:34.359 KSTBuilding confi...
Ethernet link integrity in NCS 540
Hi, does cisco NCS 540 device supports the Ethernet link integrity functionality?
EVPN support on IOS XRv 9000
Hi, I would like to know whether EVPN is supported on IOS XRv 9000 and if yes which flavors. Many thanks!
Resolved! ASR 9902 Interface numbering
This is a fixed port router with a mix of SFP+, SFP28, QSFP28 and QSFP-DD ports The install guide says they are split between slice 0 and slice 1 with 24 ports per slice How does this translate into the rack/slot/instance/port schema ? is the slice ...
PPPOE configuration on asr9k
Team,,We need to do below similar configuration of ASR1002 in our new ASR9001 please supportip dhcp pool PDY-3network 30.23.0.0 255.255.0.0default-router 30.23.2.1dns-server 8.8.8.8 4.2.2.2bba-group pppoe PDY-3virtual-template 3sessions per-mac limit...
Resolved! Traffic stuck at Route Reflector
I am studying for the CCNP Service Provider and I am trying to understand the Route Reflector design and configuration regarding MPLS LDP. I have read that the Route Reflector does not need MPLS with LDP since is not part of the forwarding plane. Bu...
A99-12X100GE with A99-SFC-S / A99-SFC-T without being oversubscribed
Can the A99-12X100GE modules run in the ASR-9910 or ASR-9906 at line rate (not oversubscribed) with 5 x A99-SFC-S or 5 x A99-SFC-T ?We have options for A99-RSP-TR or A9K-RSP880-LT-TR. Can this work with these RSPs running IOS XR 7.9.2 ?We have tried...
| User | Helpful Count |
|---|---|
| 3 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |
