Data Center and Cloud

Professionals using or considering Cisco data center technologies can join the conversation to discuss UCS, server and storage networking & more.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Browse the Community

UCS Director

Discussions, knowledge articles and more

731 Posts

Cisco Intersight

Join the Cisco Intersight conversation. Get product updates on new Intersight features/functionaliti...

133 Posts

Nexus Dashboard

Nexus Dashboard incorporates Nexus Insights, Network Assurance, and Multi-Site Orchestrator, as well...

135 Posts

Activity in Data Center and Cloud

Refreshing APIC-L2's with APIC-L4's

Hello all,I'm trying to make sure I understand the procedure for refreshing our current L2 APIC's with our new L4 APIC's.Currently our fabric is running 5.2(4) , and the new L4 APIC's require either 5.3 or 6.0.5 (which has just come out and is what w...

vv0bbLeS by Level 1
  • 2 Views
  • 0 replies
  • 0 Helpful votes

Deploying Cisco Nexus Dashboard Insights

Join us as our experts walk you through the requirements and deployment considerations for the Nexus Dashboard Insights application on a Nexus Dashboard cluster. This session will cover initial setup and how to onboard sites and enable key functional...

zsoulios by Cisco Employee
  • 35 Views
  • 0 replies
  • 0 Helpful votes

UCS B200 M4 server wont entirely boot

upon receiving power, it does in standby for a bit, before the blade health LED flashes green, and then the power button turns green, and it says that it is testing memory, before going back to standby, with a solid amber blade health LED. The RAM is...

Ferra by Level 1
  • 110 Views
  • 6 replies
  • 0 Helpful votes

Syslog configuration - APIC

Hi,I'm trying to configure syslog in APIC.. I did the basic config (dest group and source) but when I want to verify via cli with the command "ps -A | grep rsyslog", nothing appeared !! test works with logit command and I can see logs in /var/log/ext...

conf-t by Level 1
  • 83 Views
  • 0 replies
  • 0 Helpful votes

Resolved! VIC 1340

Hi Team,I have a blade B480 M5 with 6146 CPU , I am planning to install redhat 8.9 which is supported starting from 4.2(3) but looks like the CNA Adapter does not support on 4.2(3) for this matrix but 5.0(1) is supporting this 1340. Is there any issu...

Resolved! Nexus 9K OSPF configuration

Hello experts, I have currently an OSPF process running on a Nexus switch. I have a requirement to bring another OSPF neighborship with the same neighbor but under a VRF.  The question is can I use the existing OSPF process and do something like this...

CISCO APIC Automate

We need validate below GUI config and validation\configuration procedure in automated way instead of manual validation/configuration.Please let us know if we have any automation procedure for validation or take actions to automate this settings for v...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Share your Expertise

Level up by answering questions in your area of expertise.