I have a B200 M5 blade that is physically stuck in the chassis.The release handle on the blade will not completely open and will not release the device.Any suggestion on how to remove it?

Resolved! Can I change the Chassis/FEX discovery Policy ONLINE from "none" to "port Channel"

Hello UCS frinds My Question is -Can I change the Chassis/FEX discovery Policy ONLINE from "none" to "port Channel" After I set it to Port Channel i have to reacknowledge the Chassis Can I Do this online? Without intetrrupt?

AAEP Maximum Domains

Hi All,I'm currently designing an ACI solution for a single customer that wants to use multiple tenants for different business functions (prod, dmz, dev etc) whilst using the same physical infrastructure. For ACI, I typically configure separate VLAN ...

UCS : Power Management : fence agent :Intersight

OLVM requires fence agent setup for power managementAll listing of Service Profiles in the Cisco 6296 environment with B200M3's were testing fine.Listing Service Profiles : fence_cisco_ucs --ip='10.16.16.80' --username='fence-kvm-user' --password='fe...

Configure Third Party Repository on Cisco Open NX-OS

The Cisco Document Team has posted an article. This document describes how to setup Extra Packages for Enterprise Linux (EPEL) as third party repository on the Cisco Open NX-OS. Know of something that needs documenting? Share a...

Cisco Umbrella

Using Cisco Umbrella as firewall and attempting to play video that requires "jwplayer6" which is being blocked. Where do I search for the Clients IP Address in Umbrella so I can tell precisely what's going on? Thanks in advance.

Resolved! vKVM application unable to launch

Hello,we are performing a staging and firmware updates on a bunch of C220 M5 standalone servers delivered with CIMC 4.1(2a) loaded. After initial CIMC setup we are able to connect to CIMC GUI, all looking fine, however, we are unable to launch vKVM c...

One of a switch in a stack is frozen

I have a stack of 3750 switches, which have 5 switches in it. One of the switches (switch 4) in the stack is frozen. The way I can tell is because all the lights on the switch are turned on, and I cannot toggle using the mode button in the switch. Al...

Issue with Assigning a Provided Contract to vzANY in Cisco ACI

Hello everyone,I'm reaching out to the Cisco community for assistance with a problem I'm encountering regarding the assignment of a Provided Contract to vzANY in Cisco ACI. I've tried various solutions but so far haven't been able to resolve this iss...

Getting error while installing cisco intersight virtual appliance

I am installing cisco virtual connected appliance using vcenter client hosted on esxi host. I followed the installation steps from cisco (https://www.cisco.com/c/en/us/td/docs/unified_computing/Intersight/b_Cisco_Intersight_Appliance_Getting_Started_...

Resolved! vAPIC vMotion

Hi everyone,Can we place vAPICs from version 6.0(2) in the same host? (I know that it's not best practice. I just want to know the possibility from a technical perspective)can we vMotion vAPICs in this version? (I know that in ACI mini we can't) Tnx ...

UCS B200 M4 server wont entirely boot

upon receiving power, it does in standby for a bit, before the blade health LED flashes green, and then the power button turns green, and it says that it is testing memory, before going back to standby, with a solid amber blade health LED. The RAM is...

Resolved! Static path binding for vpc option not coming in aci

I have created four vpcs-ipg in the fabric policy but when trying to bind it to the static port in EPG of the Application profile then the fourth option(which i need to add HXV-VPC-IPG) is not coming. Please help out since I am a newbie in configuri...

Resolved! NIC Teaming Supported on UCS

Hi Everyone, Hope you are all good. My question is if we installed windows on bear metal blade with two vNics, let say vnic01's one primary path is Fabric-A and vnic02's primary path is Fabric-B both vnics are enable for fabric failover. In this cas...