Activity in Wireless - Mobility
Cisco Catalyst 9800-40 Wireless Controller
Hi all,I am new to Cisco WLC.I have Cisco Catalyst 9800-40 Wireless Controller and it is running on software version 17.3.4c.I am told to upgrade to the latest one and I have no idea which is the latest one with no bug in it. I tried to download the ...
Resolved! Am I the only one that missed why "reset system both in ...." has been "disabled" ?
So normally when I update a couple of SSO WLCs I: download the software to WLCs, predownload to the APs, swap AP image, save system settings and then do a scheduled reload because thats the only command I know of where you can also reboot all the AP...
9800 WLC CLI PIV Works but Web GUI Doesn't
I have successfully enabled PIV authentication for CLI via ISE. However, web does not work, gives me openresty error after entering my PIN. Background - I am with DOI and obtained a certificate for the WLC from the DOI CA. Our PIV cards are provid...
Cisco 3504 DCA problem
Hi Guys, I have face a very weird issue. Currently my environment are running with 2 x C3504 in HA. There have 18 AP mixed with 1702, 1852, 2802, 9120. Some support for CleanAir some not. Too use all this model, we had choose the version 8.10.130. S...
2 x 9800 L 17.94a and Prime 3.10 patch 4
Currently testing 9800 L, built 2, left one with a basic config so always have a guide and one with more config to match current 5520s before migration.Both 9800s are talking to prime, issue is one is one with more config now not updating AP details....
Resolved! 9800 WLC - CLI command for AP Primary controller assignment?
Been working more and more with the 9800 WLC's recently and starting to get more comfortable with them... Does anyone know what the equivalent CLI command is in the 9800 WLC for "config ap primary-base WLC03 Cisco_AP_1 192.168.142.12" That was used ...
Protect Company WiFi from private hotspots with massive interference
We manage a large building with a spacious indoor area where optimizing channel distribution and adjusting transmission power for optimal coverage is quite intricate. Currently, all clients operate on the 5 GHz frequency.We've observed a significant ...
WLC 9800-CL - help with correct interface/SVI configuration
Hello all, we are currently transitioning to a virtual 9800-CL WLC, hosted on a VMWare node on premise. The WLC and the FlexConnect APs are working correctly but I am experiencing a weird behavior with the interfaces. The APs are on VLAN 1 - 192.168...
iPads continually drop from wireless.
I work for a large company. We have many iPads used for scheduling zoom room meetings and they are all on the same SSID at all locations. These iPads will go through a stretch of having a solid connection then all of the sudden many office will start...
9800, mDNS: can flex AP cach a wired mDNS record from the central WLC?
Anyone know if it is possible for a flex AP to cach wired mDNS that has been centrally learned on the WLC? Or does this only work when the AP is in local mode?
Temporary loss of WIFi connection between handheld terminal and AP
Hello,We got new terminals Honeywell EDA61K, but we have a problem with connection loss.Wireless LAN Controller is Aironet 2800 Series ME. Terminals randomly lose connection. After a while he returns.I switched the WiFi network only to 2.4. This redu...
Cisco 2500 Wireless Controller, limit bandwidth for WLANs
Hello!I need help, I have a problem with limiting the speed for connections on a guest network. I've already studied the manual several times, but I can't figure out if there are any such settings on the Cisco 2504 Wireless Controller, Product Versio...
Cisco WLC upgrade
Hello! I have configured WLC with software version 8.8.130.0. To which version is it recommended to upgrade? Thank you!
WIFI design for the warehouse
Hello everyone. Much has been written and said about the design of WIFI for warehouses.I would love to hear from your experience in order to make a decision on a complete system from MERAKI16 corridors each about 60 meters long. shelf's between each ...
Lets figure out the U-BOOT flash procedure together. (TAC UNLOCKED)
Ok guys so i noticed on all the wave 2+ APs cisco are now using the U-boot bootloader and documentation for it is little to none. I have a good amount of experience recovering and restoring APs. When i deploy APs for clients i prefer to format the fl...
| User | Helpful Count |
|---|---|
| 87 | |
| 36 | |
| 24 | |
| 15 | |
| 11 |
