Activity in Wireless - Mobility
AP Status joined but obb error image download
My ap Is joined but l got errors with obb AP-model ap-air2802i-b-k9 wireless controller 9800-CL 17.9.4 [*04/20/2024 19:08:59.6159] Discovery Request sent to 192.168.178.150, discovery type STATIC_CONFIG(1)[*04/20/2024 19:08:59.6432] Discovery Reques...
Problem with AP configuration cisco CBW150AX. I can't connect to netwo
I have a secret problem with starting Cisco Access Point: CBW150AX-E-EU.When I connect it directly to the Cisco ASA 5506x, the AP does not want to connect at all. It means it doesn't get the address from DHCP. DHCP allocates a windows server. When I ...
C9800-80 in HA cannot install APSP6
Hello everyone,I'm trying to figure out a frustrating issue. Attempting an install of APSP6 keeps bombing out and I'm unsure what steps to take next. Software: Version 17.09.04aROM: 17.3(3r)Error in question: Dec 13 21:21:01 Eastern: %INSTALL-3-OPER...
Resolved! AP-AIR2802i-B-K9 No join
l installed newest version of Wireless controller 9800-CL Cloud but wont Join DTLS Error l dont why it wont join to controller
wifi network drops during the day - AIR-AP2802I-Z-K9
Deal All, I would like your help regarding a problem that has been going on for a long time. Many users at the company have complained that the WiFi connection on their laptop drops several times during the day. I have been monitoring some of t...
Why we need 6GHz Standard Power and AFC
By now everyone should have heard the news on 6 GHz and Wi-Fi 6E that was announced initially back in April of 2020. Customers have been deploying and turning up these networks on Wi-Fi 6E AP’s operating under LPI (Low Power Indoor) rules for many ...
Client status locked in "Web Auth Pending" on WLC 9800-40
Hello all, I'm having an issue with clients connected on my Guest SSID configured with Web Authentication Splash Page. Basically by today (NO CHANGES NOR ACTIVITIES WERE DONE) all the clients which are trying to connect to this SSID cannot reach th...
Resolved! Mobility Express Upgrade Failure
Hello, I am in the process of updating a Mobility Express WLC from Cisco. I have deployed the TFTP server and the correct images and the pre-download worked on all access points except one. In the following picture you can see what output I get. I l...
C9800 WNCd
i've seen this item "Site Tags AP to WNCd distribution" in best practice of C9800 Design and Deploymentmy quiestion is how can i configure multiple WNCd and where is the location of settings in webui?
Resolved! A question about MAC addresses for access points
Can anybody tell me what exactly is the difference between the radio MAC address vs the ethernet and Wi-Fi mac addresses? What is the purpose of the radio MAC address? Apparently, wireless access points don't just have an ethernet and Wi-Fi MAC, but ...
Client roaming between APs at high traffic load cause 3 second gap
We are operating our vehicles remotely in the underground mines over Wi-Fi, the data load from the machine is constant around 30Mbit/s (yes, six to eight HD-cameras).When switching between APs we have noticed that we sometimes get a transmission gap ...
CMX - cmxadmin password recovery 11.0
I am following this document to recover and reset the password for "cmxadmin" https://www.cisco.com/c/en/us/td/docs/wireless/mse/11-0-1/cmx-config/b_cg_cmx1101/performing_administrative_tasks.html#id_131101 When I reset my VM Server and edit ("e") in...
Resolved! How to disable mac address in 9800 WLC
Hi Guys, As we know, there is option in Cisco 5520 WLC to mannualy disable any Mac addresses of user to deny network access to him. Is there any disable mac address option in Cisco 9800 WLC?
Upgrading 1 access point in ME from 8.5 to 8.10.
I am trying to upgrade my 2801i in mobility express from 8.5 to 8.10. Note:- My main wlc is already in 8.10, I need to upgrade another access point so that it can join main ME WLC.
| User | Helpful Count |
|---|---|
| 53 | |
| 25 | |
| 15 | |
| 15 | |
| 9 |
