Wireless - Mobility

Connect with peers and Cisco on all aspects of wireless tech including security and network management, LANs and indoor and outdoor access points.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Browse the Community

Activity in Wireless - Mobility

AP-AIR2802i-B-K9 No join

l installed newest version of Wireless controller 9800-CL Cloud but wont Join DTLS Error l dont why it wont join to controller 

lisavbedt by Level 1
  • 108 Views
  • 8 replies
  • 0 Helpful votes

Wired Guest issues in foreign-acnhor setup

Wired guests are not able to get out to internet, they can ping only at when payload is set to 1300 bytes or lower, this seems like an MTU issue, but its only effecting wired guest not wireless guest. Setup is a 9800 foreign on 17.9.5 code and 5520 a...

ammahend by VIP
  • 46 Views
  • 2 replies
  • 0 Helpful votes

WLC, SSO and OEAP

Hi I got a pair of 5520 in SSO mode version 8.10.190. If you want to run OEAP then you need to enable Enable NAT Address on the management interface. The problem is that the "Enable NAT Address" is greyed out: the question is: is it possible to enab...

nat,.JPG
Moudar by VIP
  • 100 Views
  • 3 replies
  • 0 Helpful votes

Spaces Telemetry issues

I'm trying to get environmental stats back from 9136/9166 on Spaces. I've imported the maps successfully and have enabled the IOT service in spaces. I'm still getting errors for the TDL Telemetry under the troubleshooting section which seems to be pr...

WLC 9800 - ignoring client - [rogue-core]

Hello,I've got question related to this particular debug entries (from radioactive trace):2024/04/18 13:06:43.944436 {rogued_R0-0}{1}: [rogue-capwap] [25943]: (debug): Client info (2/2), MAC:<xxxxxx>, reported by yyyyyyy, GW: 111111111, chan:40, rssi...

Resolved! How to disable mac address in 9800 WLC

Hi Guys, As we know, there is option in Cisco 5520 WLC to mannualy disable any Mac addresses of user to deny network access to him. Is there any disable mac address option in Cisco 9800 WLC?

Noovi by Level 1
  • 1562 Views
  • 5 replies
  • 0 Helpful votes

cisco 2504 WILAN ERROR MESSAGE

  Dear All.,My Cisco WLAN CONTROLLER 2504 suddenly started to De-associate Access Points. Attached herewith is the Error Message gotten from the GUI Let me know if anyone has solution to address this thanks.

Resolved! 9800 Guest Anchor Design

I am trying to understand Guest Anchoring with the 9800 Controllers. In the 5500 series WLCs you had to access the WMI from the inside network through the firewall to the Anchor Controller Mgmt Vlan on a DMZ.  Then create another sub-interface on the...

RF Heat Maps not shoiwng in Prime 3.10

Hi, We have recently deployed Prime 3.10.2 and added a 9800-L (SW 17.6.4) along with 10 X 9130 APs.. On adding the APs to the site maps within Prime, there is no RF heat maps being emitted from them. Just wondering if any has come across this issue a...

AP Alarm

 What is the meaning of this Alert and what can I do to mitigate this. (for Unified Access Points)Message: '802.11a/n' interface of AP 'XXX' associated to controller 'XXXX)' is down. Reason: Radio reset due to (56) Radio channel set

collrbbrt by Level 1
  • 79 Views
  • 1 replies
  • 0 Helpful votes

AP cutover migration from 5520 to 9800-WL during

Good afternoon,A new client is splitting off from a parent company this Fall. They current have AP1852E-B-K9 and WLC5200 and they want to migrate to 9800-WL. I will have an instance of the 9800-WL stood up before cutover, but once the WAN is moved fr...

ACL for management access on AireOS and IOS

Our WLCs currently have management access (HTTP/S, SSH, SNMP, etc.) restricted to certain IPs/subnets via an ACL in the router upstream. Is there a way to accomplish this on the controllers themselves, both for AireOS (version 8.10) and IOS (version ...

Can I change the regulatory domain for our new CW9164I-ROW AP?

We have a 9800-CL Wireless Controller running 17.12.2.  We just got a new CW9164I-ROW AP and its registered by the operational interfaces are down due to a regulatory domain error.  Is there a way to change the regulatory domain for the access point?...

Computers disconnect continuously from WiFi when in office

Our Customer is facing issue on their corporate SSID , We have capture debug and found below logs . Can anyone suggest what can be issue , currently WLC is on IOS 8.5.171.0 and access points connected AIR-CAP3702I-Z-K9.Debug logs apfMsConnTask_3: Apr...

amit.gaur by Level 1
  • 198 Views
  • 6 replies
  • 0 Helpful votes

A question about MAC addresses for access points

Can anybody tell me what exactly is the difference between the radio MAC address vs the ethernet and Wi-Fi mac addresses? What is the purpose of the radio MAC address? Apparently, wireless access points don't just have an ethernet and Wi-Fi MAC, but ...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Top Experts - Last 30 Days