Wireless - Mobility

Connect with peers and Cisco on all aspects of wireless tech including security and network management, LANs and indoor and outdoor access points.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Browse the Community

Activity in Wireless - Mobility

Equivalent Command for 9800

A simple question....If I just knew where to find the answer:Doing MAC authentication on an 5520 WLC, I can see the MAC addresses accepted by the WLC if I issue the command:"sho macfilter summary"Can anyone tell me the equivalent command on a 9800 (y...

roo54 by Level 1
  • 105 Views
  • 5 replies
  • 0 Helpful votes

AP2702i degrading throughput

Hi community!I posted about some 2702i in autonomous mode, degrading throughput after some time - see post: Autonomous Mode Failing on Aironet 2702i-z-k9 - Cisco CommunityLast days I got a WLC 2504 and other 2702i access points  (in controlled - LWAP...

AP issue

Hello we have a local 9120axi AP with a 9800LC WLC that seems to be losing connection. The AP is in flex connect, all config looks fine: AdvancedCountry CodeUS  Multiple CountriesUSStatistics Timer180CAPWAP MTU1485AP Link LatencyEnabledAP PMK Propaga...

Bonjour Service (mDNS) for wired and wireless devices

We have wireless and wired devices that uses Bonjour (mDNS) service to discover each other. I need to configure both wired and wireless devices in the same VLAN . We have Cisco WLC 5520 and APs that support flexconnect feature. I need to configure AP...

reason (Cred Fail) on Interface capwap

Hello friends, I have a virtual WLC 9800 running version 17.6.5. A client is unable to connect from a specific PC, but can connect successfully from other devices. I have verified the credentials, and they are correct. The specific PC can connect nor...

Leo TI by Level 1
  • 2472 Views
  • 24 replies
  • 0 Helpful votes

WLC9800 map two vlans on the same ssid

Hello, I have a WLC9800 with 9115 APs.For clients, I have a Vlan (100) mapped to an ssid. I want to add another vlan (102) mapped to the same ssid.I have added the vlan 102 (configuration, layer2, add vlan), i have created a vlan group and added both...

9800 WLC-Same Vlans on multiple sites in SD-WAN setup

I have a 9800-CL in an SD-WAN setup. I have multiple sites that have the same Vlans at each site to make it easier to manage and remember.Ex:NorthSite: data-4, voice-5, wifi-6SouthSite: data-4, voice-5, wifi-6etc...My current WLC configuration has on...

GeorgeC71 by Level 1
  • 144 Views
  • 6 replies
  • 0 Helpful votes

AIR-AP2802I-E-K9 fail to join

Hello ,We are having problem with one AP to join the WLC , all others successfully the controlle. the console output is :[*03/19/2024 09:08:50.0003] CAPWAP State: DTLS Setup[*03/19/2024 09:08:50.0035] dtls_process_packet: DTLS Error: 1040[*03/19/2024...

zillams by Level 1
  • 309 Views
  • 7 replies
  • 0 Helpful votes

user auth without user cert?

We have a chicken & egg situation where ISE requires a user's login and the presence of a user cert from AD before the user can be permitted to connect to the corporate wifi. But the user needs to connect to wifi to get the cert. One solution i have ...

jmcgrady1 by Level 1
  • 90 Views
  • 4 replies
  • 0 Helpful votes

Extremely slow and poor overall WiFi quality with C9130AXI

Recently swapped our 3802i APs for all C9130AXI to get the WiFi 6 capability. Have noticed very poor performance overall. Only change has been with the APs, nothing else. The controller remained to be an AIR 3504 and the switch is a Catalyst 3850 UPo...

NexCyb by Level 1
  • 123 Views
  • 3 replies
  • 0 Helpful votes

WLC 5508 licenses

I have a WLC with 11 registered access points I tried to integrate a new equipment, but I see that I already have my 37 licenses in use. Can you guide me and let me know what this is due to?there is a way to release licenses from the WEB portal or...

angelalmaras_0-1713897847230.png angelalmaras_1-1713898066080.png angelalmaras_2-1713898103303.png

Updating Radius server

Hi,If Radius server gets updated with the new IP address, will current users remain connected or will they need to reconnect?I am asking for both AireOS and 9800 WLC. 

iores by Level 1
  • 88 Views
  • 2 replies
  • 0 Helpful votes

Resolved! How to do VLAN mapping per Flex Profile on a 9800 WLC

Hi,I have a Flex Connect design on a new 9800 WLC.I would like to know if I can have a different VLAN ID per SSID like the AireOS FlexConnect Group - WLAN VLAN mapping. In my design the Flex Profile is equal to a Branch Office. So I would like to con...

tlarsen by Level 1
  • 3071 Views
  • 11 replies
  • 0 Helpful votes
Top Experts - Last 30 Days