Networking

Collaborate with peers and Cisco on all aspects of your network, including Cisco Digital Network Architecture (DNA), routing, switching, and more.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 

Browse the Community

Cisco Catalyst Center

This community is for technical, feature, configuration and deployment questions. For production dep...

2144 Posts

NFVIS Solutions

Join peers and Cisco experts to discuss Cisco’s Network Function Virtualization (NFV) products and s...

12 Posts

SD-WAN and Cloud Networking

Join this community to interact with your peers and Cisco about SD-WAN and all things related to sec...

2090 Posts

Switching

Discuss Catalyst brand switches with peers and experts.

105537 Posts

ThousandEyes

Join us for information about our use cases, common troubleshooting, discussions, getting started gu...

135 Posts

Activity in Networking

Customer is receiving unexpected traffic through BGP

Greetings,The customer has 2 BGP links towards us, separated dual homed (PE1-CE1 & PE2-CE2), who is asking why they are receiving traffic on link No.1 even they have already configured route-map to deny all routes imported from & exported to PE1. The...

Resolved! Questions about L2 VPN ping

Greetings,On an international L2 VPN service, the customer is complaining about latency.Here are several ping tests on the 2 PE routers:RouterA#ping mpls pseudowire b.b.b.b vcid source a.a.a.a repeat nSuccess rate is 100 percent (100/100), round-trip...

IP routing using domain

The host for my current server (Windows Hyper-V machine with four or five VMs) that handles my email and web sites is going away. I'm planning on moving that physical server to my house and using DDNS to route that traffic in. Realize this is very lo...

SNMP OID temperature

Helo SIRplease help me, I want to add a temperature switch graph to the cacti, how do I do it? how many OIDs do I need to add to the cacti? I use Cisco WS-C2960L-48TS-LL and C9300-48T-4X-E switches, thank you

API work with python

Hi We are configuring cisco devices via python. and also trying to exploring with API. When using API, there are some connection issues which are not clear yet. So I would like to know what kinds of cisco device can support API. and how can we use AP...

Leftz by Level 4
  • 422 Views
  • 5 replies
  • 0 Helpful votes

Help with extended access list

So I've been working on my project and I've implemented vlans nad also router stick.Now I want to block connections between vlans that are not same with extended access list but something does not work..Here are the commands that I've writtenip acces...

Switch: Prompt 3650

Hi all, I have a 3650 stuck in the switch prompt. I've tried to set the IP address using the below commands so that I can upload the IOS, but I am unable to. set IP_ADDR Set DEFAULT_ROUTERbelow is the file system outputswitch: dirList of filesystems ...

Resolved! Nexus ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface Ethernet is down

Hello,I have a Nexus 9K trunked to a C9200LOn the Nexus 9K the port is:interface Ethernet1/19switchportswitchport mode trunkswitchport trunk native vlan 888switchport trunk allowed vlan 1,254,995no shutdownOn the C9200L the port is:interface TenGigab...

open24hrs by Level 1
  • 2317 Views
  • 3 replies
  • 0 Helpful votes

separate wireless traffic from LAN traffic

I have some branch locations with a simple set up. A router with an access switch connected to it, then another access switch connected to that one to provide POE to IP phones. Currently all devices are in the same VLAN.I also have an access point co...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Share your Expertise

Level up by answering questions in your area of expertise.