Dear friends,We are planning to deploy new SD-Access and SD-WAN infrastructure, but I had a few questions:Is it possible to connect remote branch SD-access equipment (DNA access switches) behind SD-WAN router? I mean to see it in Fabric, configure vi...
We're looking at enabling the P2P blocking feature on guest ssid. We can see the option within WLC GUI but can't see corresponding options within DNA Center.Q1. Is this somewhere in DNA Center that I've missed (2.3.3.6)?Q2. If setting is applied v...
Hello all!A small disclamer here, i am completely new to the cisco environment. And therefore this is my first ever configuration to a cisco router. The router is a ISR-1100 series.I have tried following the start guides and basic configuration, but ...
how can we determine how much traffic passes through the interface vlan in the Nexus switches,the command (show interface vlan ) doesn't give the needed same as the catalyst,also, (show interface vlan counter) the values we can't read!
I am sure that I missing something simple in my understanding of how this works. I have connected my virtual CML lab to my network through the external connector. I am able to reach the internet from my edge router. However, for some reason I can not...
I work in an industrial environment which operates 24/7. We use industrial type switches, and we monitor our network from our central control room using SNMPv3 / authpriv.The issue we have encountered is that if a switch in the field dies unexpectedl...
Hi !I have an cat 1300 with Version: v4.1.0.76i want to tunnel also L2 Protocols over an Q in Q Port(i already test with Commanddescription Customerswitchport mode vlan-mapping tunnelswitchport vlan-mapping tunnel default 111switchport vlan-mapping t...
Hi all I know that upgrade a relase in ISSU mode on WS-C6807-XL-6T device is not advisable.Anyway, My question is: if the upgrade is done inside the same release train could we have problem ? for example:from 15.5(1)SY8 to 15.5.1-SY12orfrom 15.5(1)SY...
Hi everyone, I saw some strange logs today, but I didn't know what they meanFeb 25 10:51:32.493 CNT: %PLATFORM_MATM-4-QUEUE_OVERLIMIT: MATM dropped learn cache batch messages as queue limit has reached.Feb 25 10:52:32.545 CNT: %PLATFORM_MATM-4-QUEUE_...
Hello,I have subnet like this :My pc under vlan 100 (192.168.100.0/24)My NAS under vlan 150 (192.168.150.0/24)Actually when the nas and pc located under same subnet, I can discovery the nas from my laptop using vendor utility, but can't discover when...
I try to generate CSR through GUI - System setting -> System Certificates -> Generate new CSR, but I get error - "The common name does not contain a valid IP address or Domain Name" but maglev cluster network display shows that cluster_hostname the s...
Hey,I have the issue below when I want to upgrade my C9200 from 16.12.3a to golden 17.06.05.Task NameUnpack ImagesTask StatusFailure (NCSW10523: Distribution of image: cat9k_lite_iosxe.17.06.05.SPA.bin on device: 10.4.69.10 with protocol: HTTPS compl...
I have an ISR 1K with DUAL ISPs (Dialer0 & Cellular) My intention was to implement something similar to this article: https://learningnetwork.cisco.com/s/question/0D53i00000Kt1XYCAZ/nat-failover-with-dual-isp-on-a-router-configuration-example?t=17103...
I installed ThousandEyes on my C9407 switch. It seems to be working but I keep getting the following message in the switch logs%IM-5-IOX_INST_NOTICE: R0/0: ioxman: IOX SERVICE teyes LOG: Error posting results to https://data1.agt.thousandeyes.com: HT...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: