Cisco Catalyst Center
This community is for technical, feature, configuration and deployment questions. For production dep...
2148 PostsActivity in Networking
What does "2 Gigabit Ethernet combo + 2 SFP" mean in this context?
I think that it means 2 ports are support RJ45 and and also SFP. But how can a RJ45 support SFP?
Resolved! event syslog pattern syntax doesn't work
Hello,The DISA STIG, V-239941, asks that the following be configured:event manager applet BACKUP_CONFIG event syslog pattern "SYSLOG_CONFIG_I" action 1 cli command "copy startup-config scp://userx:xxxxxxx@10.1.48.10//opt/config_backup" action 2 syslo...
copy xmodem initializing no transfer c2960
Hi Guys, i had this problem for 8 hours now and can't seem to get it cracked... after i input the command copy xmodem: flash:c2960-lanbasek9-mz.152-7.e9.binand using the SecureCRT going to Transfer > send xmodem I get this and after that nothing happ...
Set up TACACS on Nokia
You want to use ISE to set up TACACS on Nokia 7750 SR, does it work?
cant wr or copy run start
hi all,before on this switch (nexus 7000) i could do a "wr" or "copy run start" no problem but now i get thiswr[########################################] 100%Configuration update aborted: request was abortedthanks,rob
application recognition service on DNAC offline installation
Hi all, Application visibility service, does not show any info on Cbar and NBar. when I provision, I get message that Application recognition service not installed to to software management. my issue is I don't have access to internet from the DNAC. ...
Resolved! DNA Center and Meraki Dashboard
Hi,I'm trying to integrate the Meraki Dashboard in DNA Center (2.3.5), but I'm running into some issues.In the "Add Device" screen it asks for "API / Password" in the "HTTP(S)" section.If I input the API here, I can get the Organization details, but ...
Can you explain on every parameter mentioned drop down for the below
Can you explain on every parameter mentioned drop down for the below interface , what does it mean ? or document or link for study ADRH465HRT#sh int Se0/0/0:0Serial0/0/0:0 is down, line protocol is downHardware is DSX1Description: PPP multilink gro...
Cisco 9200 Mgmt VRF
Hi All, am using Cisco 9200 switches and assigned management IP as under mentioned. I have some other servers which are using the same IP network and with VLAN 10 , but am not able to ping switch from my laptop configured with VLAN 10 . Can you plea...
C9500 Stackwise-virtual failover BGP downtime
Hello,we have deployed pair of 9500-32C in Stacwise-virtual. It is Aggregation node of big site and connecting to backbone by 2 EBGP links (one from each switch).I have noticed long downtime during ISSU and as we are deploying more of these to other ...
Fix empty startup-config for C9200L
For Cisco WS-C9200L-24T-4G-E, a user tried to backup configuration from Web portal. But did wrongly that uploaded empty text file to the device.That is:Copy to devicetftpaaa.txt (created from local computer)startup-configupload to device.Now the star...
Forward traffic from subnet to another on C3750
hi guys thanks for your suggestions in advancehere is my lab setup sorry for the primitive drawing(TYPO in CT2 Bib1/0/12 it is actually 123.123.123.242/30)i modified ips to fake ones. 10.0.22.1/24 is one of our vlans that has full internet access.CT1...
Increase TX buffer size exanic x25
I have a exanic x25 I wanted to know how and from where can we increase this size of the tx buffer. Any help or suggestio?
Cisco Switch Web UI with HTTPS (lock icon)?
Hello, has anyone successfully implemented HTTPS on their switch web management UI? I would like to get rid of the warning when I access the web UI, but I cannot seem to find resources about it online.I am currently using a Catalyst 9300 in my networ...
Configuring NAT overload with vrf lite on a CAT9K
Good day;Need help with how I can configure NAT overload with an existing vrf on a CAT9K_IOSXE V16.12. This is what I am struggling with, I currently have a vrf called AWSDX-S3. Now what I am trying to do is I have added a L2 SW and ran trunk ports...
| User | Helpful Count |
|---|---|
| 68 | |
| 40 | |
| 40 | |
| 36 | |
| 35 |
| User | Count |
|---|---|
| 23 | |
| 16 | |
| 16 | |
| 11 | |
| 9 |
