Recently, my system bought around 800 of the Lenovo Gen 4 Chromebooks. We already had around 2500 Gen 3 100e's that worked perfectly fine, still do. We divided the new laptops out to the locations, and 2 of the 10 locations are having issues where th...
Hello everyone.Please tell me about two AP Wi-Fi AIR-CAP3702I-R-K9, AIR-CAP3602I-R-K9.I can't find information, how many users can work on Wi-Fi AP data without problems?At the moment, I had a maximum of 36 users connected to the AIR-CAP3602I-R-K9 an...
Hi folks,Running a Catalyst 9800-40 WLC. 1463 WAP's connected, predominantly C9136I WAP's. 8,817 active clients with 4,796 clients on our SSID using PEAP authentication via ISE on the back end. We are observing clients will frequently disconnect fro...
Hello All,I cannot get C9130AXI-B Access Point to get IP addresses from DHCP Server.ConfigurationDHCP Server (dhcpserver.de) is on Win 11, connected to Cisco Catalyst C1200-8FP-2G PoE switchC9130AXI-B running EWC image v17.12.03 connected to the same...
Hello, I want to configure 802.1x authentication on an SSID on a 9800-CL hosted in Azure. I have configured the radius server, server group and method list and set this in the AAA section of the WLAN. In Wireshark I can see Access-Request coming from...
Access VLANs and Internet through multiple wireless SSIDs, using Autonomous AP AIR-CAP3702Challenge: Access internet through autonomous Access Point (Air-Cap3702i-e-k9) which populated multiple SSIDs that connected to the VLANs at Remote Office. Diag...
I have a AP2802e and was wondering if i could connect 2 antennas (ANT2566P4W-R)on it , one using the normal connectors and the other would be connected using a DART connector(AIR-CAB002-DART-R). . Dart connectorAntenna ANT2566P4W-R
I am using vwlc in conjunction with Cisco AP 2702i. I've configured two SSIDs with MAC filtering authentication. Certain APs are displaying a 2.5g connection, while others show a 5g connection.What could be the problem
Hello,we have WLC controller in our main office and some APs in it connected to WLC.Also we have remote office with local DHCP server and some APs.Remote office is connected to main office by VPN tunnel and remote office APs are added to main office ...
Hello, I have deployed EWC and around 20 AP are joined to the EWC. There was a scenario where there was a power outage. Post the power issue was resolved, All the Aps but three have re-joined the EWC. Those three Aps were showing on the switch , but ...
Hello,We have Catalyst 9100AX series APs. We want to convert one of them to EWC. We tried to factoy reset both however after the reset they are still act like CAPWAP and stuck at CAPWAP States.P.S. We have WLCs in our network but we isolated the VLA...
Hi All, My question is very simple... after the EOL of the wireless systems based on AireOS software (WLC 5508 & 5520) is there a minimum inter-operability release between these old systems and the new FireOS (WLC 9800 series)? I need to guarantee se...
I have a Cisco 3700 Series AP and trying to connect it to a WLC 5508. I have getting a certificate validation failed error, however when I use the command "show crypto pki certificates" no such expired certificate shows up. Previously had an issue wi...
Hi everyone,1. How can I force dual-5ghz radios on a cluster of 3802I in Mobility Express? I know it is possible to set the XOR radio to be 5GHz for each AP. Is there a more efficient way to set for the entire AP group?2. Is it possible to disable th...