I am using a cable from Console to serial, and that cable connected from serial to usb and i am using PuTTY. I have tested this setup with a Catalyst 2960 switch and i got output, but when i am using the same configuration for the 2504 Wireless contr...
Hello,I am trying to set up a cisco 8500 series WLC and am running into issues accessing the web UI. Here is a cisco link with the ports listed:https://www.cisco.com/c/en/us/td/docs/wireless/controller/8500/install/guide/ctrl8500.pdfWe have an ethern...
Hello.We are in the process of moving a bunch of access points from an old supplier to us as a new supplier.The old supplier does have a WLC which "holds" all of the access points.I set up a new 9800 WLC, and tried to move one of the access points to...
There are consistent critical alerts on CISCO prime for only 5 of the APs stating "Authentication Request flood", and the error description is as follows: IDS 'Auth flood' Signature attack cleared on AP 'ABC' protocol '802.11a' on Controller 'x.x.x.5...
I got problem with my AP, here is the log please help me.BootROM - 1.78Booting from SPI flash, Secure modeBootROM: RSA Public key verification PASSEDBootROM: CSK block signature verification PASSEDBootROM: Boot header signature verification PASSEDBoo...
Hello everyone,I'm trying to figure out a frustrating issue. Attempting an install of APSP6 keeps bombing out and I'm unsure what steps to take next. Software: Version 17.09.04aROM: 17.3(3r)Error in question: Dec 13 21:21:01 Eastern: %INSTALL-3-OPER...
Currently migrating from CT8510 to Catalyst 9800-80 I am looking for SNMP-OIDs for new software that will represent the count of accesspoints associated to the controller and the overall count of clients logged into the all WLANs implemented. Old OID...
Sorry for the long post. We're having a complicated issue I'm hoping someone can shed some light on.We recently migrated uplinks for our (3) SSO 8540 WLCs (8.10.190.6) and (2) SSO 9800 WLCs (17.9.4a/APSP8) off a 6500 VSS pair and onto a 9500X stacked...
Hi folks,Running a Catalyst 9800-40 WLC. 1463 WAP's connected, predominantly C9136I WAP's. 8,817 active clients with 4,796 clients on our SSID using PEAP authentication via ISE on the back end. We are observing clients will frequently disconnect fro...
Hi,I need an advise from the experts. We are looking into replacing our Cisco 2504 Wireless Controller and were told that the C9800 model will be the best next available model. We currently have about 10 APs model AP AIR-CAP1602E-A-K9. My question is...
Hi,Per the title, I've got an issue with 5Ghz clients that have good signal strength because they are sat almost underneath the AP (1832 APs) yet but struggling to get more than 1Mbps throughput. I can see the channel utilisation is over 50% but zer...
Hello,I am interested in using a WLC anchor on a (FW segregated) OT network to enable a SSID for the OT wireless segment. Is there any existing Cisco architecture or guidance for doing this?
Hey all-TL:DR is mobility group between foreign WLC (AirOS) and anchor WLC (9800) appears to have CONTROL path UP and DATA path down.Foreign: 5520 on 8.10.185.0 and 8540 on 8.8.125.0Anchor: 9800 on 17.9.4aBackground: Our enviroment has 10+ foreign WL...
Hello Team,we are using new 9800 wlc in our infraWLC-9800/ios-17.9.4aAP-Mode:Flex-connect AAA server-iseAll of sudden all clients from one particular not able to connect to wireless -corporate ssid.Clients struck in 802.1x state and error is 2024/03/...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: