I have a trunk between cucm 6.1.5 and asterisk but when a call is made from cucm to asterisk it disconnects immediately it is picked (call from asterisk to cucm is ok). But it is working with cucm 10.5. I try route call from cucm 6.1.5 to 10.5 then c...
Hello, Apologies for how late this question is! I have read that it is possible to generate a multi san certificate for the call manager service. Each subscriber in the cluster then uses the same certificate for call manager service. If I generate a...
Main issue: The Webex Room Kit Mini is pulling an IP address, but the TelePresence Touch unit, which is connected to the Room Kit's dedicated Touch port (which I assume acts at least as a pass-through network port) is not (it's getting a 169.254.x.x...
The new Cisco Meeting Server 3.8 version supports a new feature Survey, it allows the user hosting a conference or a space to create a survey in a meeting and invite the participants to take part in the survey and share their opinion making the us...
EnvironmentRoom KitRoomOS 11.15.1.6Registered to WebexTouch 10After installing the RoomOS 11.15.1.6 update, my Touch 10 was unable to boot to the home screen, getting stuck at the Cisco logo screen and rebooting constantly. It did not have this issue...
I have headset Bluetooth paired with cisco phones and working fine, but auto answer not work. I tried to enable Auto answer with headset on DN but still any incoming call on phone not auto answer, is there anything I miss other than configure auto an...
Hi, everybody,The certificate cms expired, tell me how to change it (cms.cern and web bridge trust.car). There is a pfx file and a password for it. As I suppose it is necessary to build a chain. Is there any instruction on this issue or tell me what ...
Greetings, Can you provide the URL and Body example to update a campaign via the Outbound API. I am able to Create Campaign, Get Campaign Definition, Get Campaign Records, Import Campaign Records, Delete Campaign Records, and Delete Campaign, but th...
I'm involved in the following setup illustrated below. I am Site 4. I have a SIP trunk via the CUBE to Site 1. Calls route between Site 4 and Site 1 with no problem. Is it possible to use Site 1 CUCM, to route calls from Site 4 to Sites 3 or 2? Is it...
We have many calls consider as abandoned due to caller hang-up, how I can make the calls consider abandoned if ring on agent more than 10sec, and if the calls ring on agent less than 10sec not consider as abandoned, because many calls hang-up after r...
Hi, We are using jabber 11.6 ( for testing we have also 11.8, 12.0 ) in the CUCM Cluster ( 11.5 SU4) and users are facing weird issue while using the Jabber. Intermittently the first call of the day is experiencing the one way audio. In the logs a...
Hi TeamSince CCP was retired if I am to implement Telephony on the ISR 4000 series is there a replacement or will i have to do all configuration via CLI? thanks
I want to know if certain DN's can forwarded with the called number. When Caller A DN (111) Calls User B DN(222) which forwards to User C DN(333) . I want Caller A to see DN(222) on caller ID instead of Call A's DN which is what we see typically (1...
Hello world,I am working on creating a custom report based on the stock reports available for our call center. We would like to total the abandoned call for each day, sorted by the hour of the day. I cannot seem to create a report that only shows th...
Hi,Once I open the RTMT I am getting this error message as shown in the attached file.I checked the AMC service on the 10.182.9.227 (Publisher IP) and its up. The other node (10.182.9.228) appears to be functionning normally. Please advice ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: