Cisco WLC 9800 is configured to broadcast a SSID alias as "Original_SSID", the WLC is configured with a ISE controller IP, but in the client computer we see the available SSID alias as "Other_SSID".We do not access to the ISE configuration, can the I...
Hello, we recently had our cert for our VPN expire without notification via alert message. I've done some research in the FMC but can't find anything that monitors certificate expiration dates. A google search points toward REST API's of course but t...
Is it possible to run Radius with Cert and Radius only on the same interface. I have different profiles for the two. but they share the same tcp port. Need to do a POC, and it would be much easier to have user login with just Radius, not Radius and c...
I can't seem to overcome the following error when configuring AnyConnect with SAML according to https://community.cisco.com/t5/security-knowledge-base/configure-anyconnect-with-saml-authentication-on-ftd-managed-via/ta-p/4467779:Deployment Failed: Us...
Hi,on ISE 2.4 in the live logs pages the report that one got clicking on the repeat counter was very useful because the endpoints were sorted by repeat counters. So it was very easy to find the endpoints with high repeated counters.With ISE 3.2 the r...
Hello, We have observed both on HP and Dell laptops and workstations that if they are using Intel I219-LM NIC they intermittently do not respond to EAP Identity-Request. We have excluded and have confirmed with Cisco and Microsoft TAC any other poten...
Hi, I have one issue with IPSec tunnel Lan-to-Lan between ASA 5525x (v9.8) and ASA FPR 2110 (v9.16). My Tunnel is up but ping between each client was not successful. Both peer status sh cry isakmp sa in "MM_ACTIVE".I ran packet-tracer icmp between pe...
When a client connect to the HQ via AnyConnect vpn, they can access the HQ local subnet, but can´t access the subnet at the remote office, that has an site-to-site connection to the HQ.Can this be configuret via the Cisco Firepower gui?Cisco Firepowe...
Hello , Cisco FPR version 7.2.5 is possible make group lock for local user that connect to local network over AnyConnect. I want to make Anyconnect access in our network where we have more group policy, we can not find that we can lock local user fo...
Hi All, Need to block below exe file path on server. Can anyone help me how can i do this in Cisco secure endpoint console. c:\program files\uvnc bvba\UltraVNC\winvnc.exe
During the install of Cisco ISE you are prompted for a username / password. This account then appears to be the account you can use to SSH into ISE AND Web Auth to ISE. My question is are these two seperate accounts that just happen to have the sam...
Hi EveryoneI'm using a trial version of ASAv and i believe it has full functionality but is limited in 100kbps. I'm trying to set up remote access anyconnect vpn which authenticates to our NPS radius server. As you can see in the radius debug, it see...
HiHow do we configure AAA for the FTD in chassis mode managed via FMC?I can't seem to find any information on this? The FXOS cli doesn't appear to permit you to make any changes.But i don't see anywhere to create a Chassis AAA policy. AAA for the Ins...
We have FTD devices with ASA image in production which managed by FMC and Also we are managing firewall through ASDM. so now we are removing the FMC from production and want to manage the FTD devices locally. so is there any impact if the firewall is...
HelloWe have a Firepower 1120 device. With IPS is it possible to monitor file copying over Windows RDP?If so, can it correlate the user session to what files are copied?Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: