Networking

☎*+𝟭-𝟖𝟎𝟓-𝟕𝟓𝟏-𝟐𝟕𝟗𝟒 How Do I Change My fligh𝓣 On 𝗗𝗲𝗹𝘁?

헗헲헹혁헮 phone number to call and talk with a live 헿헲헽헿헲혀헲헻혁헮혁헶혃헲 fast is ퟭ-ퟖퟎퟓ-ퟕퟓퟏ-ퟐퟕퟗퟒ // ퟭ-ퟖퟎퟓ-ퟕퟓퟏ-ퟐퟕퟗퟒ. Select your connection language upon call and choose the IVR option that best suits your query by looking through the ones that are generated aut...

VRRP issue

Facing issue with VRRP, when upstream router5 initiate traffic for downstream router6 then return traffic is not following VRRP VIP as Gateway. In my case switch2 is master and switch3 is standby.If Router6 initiate the traffic then VRRP working fine...

☎*+𝟭-𝟖𝟎𝟓-𝟕𝟓𝟏-𝟐𝟕𝟗𝟒 How Do I Change My fligh𝓣 On United?

United 헔헶헿헹헶헻헲's phone number to call and talk with a live 헿헲헽헿헲혀헲헻혁헮혁헶혃헲 fast is ퟭ-ퟖퟎퟓ-ퟕퟓퟏ-ퟐퟕퟗퟒ // ퟭ-ퟖퟎퟓ-ퟕퟓퟏ-ퟐퟕퟗퟒ. Select your connection language upon call and choose the IVR option that best suits your query by looking through the ones that are ge...

3650 IOS XE config backup

switch is running in install mode, i can see files in .pkg format. I can't find a good documentation on how to backup the config files, need help.

Resolved! MTBF for 1000BASE-SX SFP

What is the MTBF for 1000BASE-SX SFP adapters? I have looked through the product documentation/specifications here with no success (the product documentation is pretty weak): https://www.cisco.com/c/en/us/support/interfaces-modules/1000base-sx-sfp/mo...

Need some assistance with some basic VLAN/Routing config Cisco 1941.

Hi all I'm setting up a CISCO LAB to keep me busy in my retirement. My Current network consists of a TP-Link Deco mesh network which works well for my IOT, PCs and internet access. I just got hold of a Cisco 1941 router with a EHWIC D8SGP module. ...

Lan Automation: What to do with "queued" devices

When i discover a new switch with LAN-automation other switches, which are not directly connected to the specified interface are going into a queued status. Which means:Queued: The device is queued for later processing because it isn’t directly conne...

Configure Administrative Distance for DHCP Routes

The Cisco Document Team has posted an article. This document describes how to configure and verify Administrative Distance (AD) on default routes received via DHCP. Know of something that needs documenting? Share a new document...

Router Modem and CRC Relationship

Hi,We are finding that some router models are more susceptible to CRC increase/snr decrease than others and tend to lose sync more easily especially when it comes down to sudden spikes in crc indicative of REIN/SHINE issues. Im trying to determine wh...

Cisco cellular Gateway stuck in green blinking

Hi all,I am installing a cisco cellular gateway CG522-E and after installing the sim card and powering up, the gateway ends up with the led flashing in green without moving to blue. I have tried removing and reinserting the sim card, powering up agai...

Cisco DNA Center Telemetry

Hallo All! What is the reason that when enabling Telemetry on C9300 Series Switches, only Application Name, Usage and Througput are shown? Switches configured with telemetry show only Application Visibility (Name and Throughput) in DNA center. Why is...

Catalyst C2960-C Essential Licenses SKU

Hi Community, According with the below document, switches C2960-C are supported by DNA Center. https://www.cisco.com/c/en/us/support/cloud-systems-management/dna-center/products-device-support-tables-list.html Can you please confirm the SKU of the ...

QOS for a Destination-ip in Cisco IOSXE

Hi All,We have a URL which resolves to particular public ip and performance of that website is slow than expected from our office . We have a P2P link from office to DataCentre and from DataCentre it exits to internet. We observed the performance was...

destination address is the broadcast address within matched route

Please see attached pic. In this question, the destination address matches the route in the routing table. But it's the broadcast address within that range. Would the packet still be routed with that route?what would the next hop be? 192.168.0.7 or 1...

Nexus 93108TC-EX - %DAEMON-3-SYSTEM_MSG: Error

Hi, We upgraded our Nexus-93108TC-EX devices to software version 10.2.4.M and now we are receiving the below warning message. I believe this is a bug , how can we resolve this issue? Any assistance would be greatly appreciated. 2023 Apr 18 14:10:58 ...

Networking

Browse the Community

Cisco Catalyst Center

Cisco Annual Internet Report Discussions

IPv6

Networking Blogs

Networking Knowledge Base

Network Management

Networking Videos

NFVIS Solutions

Optics and Optical Networking

Other Network Architecture Subjects

Routing

SD-WAN and Cloud Networking

Software-Defined Access (SD-Access)

Switching

ThousandEyes

Activity in Networking