HELLO, i have cisco aci fabric with many pords, one of my pods are made by 2 x Cisco Nexus 9332C spines connecting 16 leaves with 4 uplinks for each leafs.I already used all the ports of the spines and i want to replace the 32 ports Cisco Nexus 9332C...
Hi Guys, I am gathering some info from one ACI Fabric, my end goal is to get the moqueries with grep filters to list out all the ip's configure on the l3outs. Rather it the routed interface or svi. Need Help
Hi all, I need to inventory the SPF plugged in the SPINE and LEAF of our ACI Fabric, but didn't find a menu where i can check that information, Anyone knows if is it possible to get that information consolidated? Our Fabric is version 2.1(2g) Thank...
Hello all,I'm trying to make sure I understand the procedure for refreshing our current L2 APIC's with our new L4 APIC's.Currently our fabric is running 5.2(4) , and the new L4 APIC's require either 5.3 or 6.0.5 (which has just come out and is what w...
HiI'm working with a customer that has a Dual DC setup with 2 x Nexus 5600's in each DC in a vPC setup. These switches connects the two DCs together with 4 x 10G using FabricPath. The customer will leave one of the DCs and during the migration the ne...
Howdy Folks, Can anyone confirm if the UCS-FI-6454 can support a copper 10GBASE-T SFP+ module, specifically the SFP-10G-T-X? So far, all I've check the optics compatibility matrix and the 6400 spec-sheet and I see no mention of this module being supp...
Join us as our experts walk you through how to use the Pre-Change Analysis feature in Cisco Nexus Dashboard Insights to understand the impact of configuration changes on ACI fabric before they are executed. You will learn how to verify the configurat...
Join us as our experts walk you through the necessary steps for a smooth and successful upgrade of a Nexus Dashboard cluster and hosted apps such as Nexus Dashboard Insights. This session will provide you with important resources to prepare for your ...
Join us as our experts walk you through the requirements and deployment considerations for the Nexus Dashboard Insights application on a Nexus Dashboard cluster. This session will cover initial setup and how to onboard sites and enable key functional...
upon receiving power, it does in standby for a bit, before the blade health LED flashes green, and then the power button turns green, and it says that it is testing memory, before going back to standby, with a solid amber blade health LED. The RAM is...
Greetings, thanks for reading. I have NetApp storage attached to Nexus 5k for the FCoE zoning and SAN boot and then to ACI.We simply removed those connections to the 5k and instead directly attached to the Fabric Interconnects and went from twinax to...
Hi,I'm trying to collect information about status of a leaf for a specific interface and I need operational status and admin status data.With this simple PY script I collect everything about IF but I can't see operational status, just the administrat...
Hi,I'm trying to configure syslog in APIC.. I did the basic config (dest group and source) but when I want to verify via cli with the command "ps -A | grep rsyslog", nothing appeared !! test works with logit command and I can see logs in /var/log/ext...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: