Cisco Catalyst Center
This community is for technical, feature, configuration and deployment questions. For production dep...
2140 PostsActivity in Networking
EEM scripting help
I'm trying to have EEM script where I run the script manually and it display the output of the results in the session but for some reason I'm unable to do so. This is what I have so far(config)#event manager applet TestCommand(config-applet)# event n...
High Memory Utilisation 9200L
We are seeing random high memory utilisation spikes on our Cisco 9200L switches, running version 17.9.4a. We thought this might be related to the application visibility that is pushed out to them via Cisco Catalyst Centre, so we disabled application ...
Reset mot de passe sur Cisco Nexus N3K(C-31108TC-V)
Hello, Je désire resetter le mot de passe d'un Switch Cisco Cisco N3K(C-31108TC-V). Je n'Ai pas accès au CLI via ssh ou console port. Merci pour vos retours
IE-3400 switch l2nat causing connectivity issues
Newly installing these Industrial switches for our PLC networks uplinked to C9200 switches. We are wanting to use some of the ports for l2nat and have gi1/1 as the uplink with the associated vlan (2009). L2nat works perfectly, but we would like to ...
redundancy in core layer
hi guys . i have a network with below topology. In the core layer, I want to have redundancy, which means that if the main core switch of my network has a problem, the backup switch will automatically enter the circuit. What method is there?
Loading config from file doesn't import MAC address table.
I'm using a 9200 device running IOS 17.9.I use a script and spreadsheet to generate my config file, which I then copy onto my devices via TFTP and then copy to the running config. Nothing unusual there. However, if I then ask the device to show me th...
Puzzling results when pasting in ACL config to switch
Hello, I was creating 2 decently large ACL's to match some traffic today and I noticed something peculiar that has me puzzled. My first ACL has approx 90 ace's and pastes them fine. When I go back and look at the ACL, it looks like there are only lik...
Reinstall Prime VM
We have a Cisco Prime 3.10 VM running in a VMware ESX. We have to move it to a new environment with VMware ESX. What is the best way to proceed?
Configure Route Leaking for Service Chaining in SD-WAN
The Cisco Document Team has posted an article. This document describes how to configure and verify Service Chaining to inspect traffic across different VRF. Know of something that needs documenting? Share a new document request...
Capturing the Flag!!!!
Just capturing the flag, and checking creating new conversations!!!
Upcoming Event: Capture the Flag, get the Badge!
You asked, we heard you! Introducing the ThousandEyes Support Community Capture the Flag event from April 23rd at 8 AM PST to April 29th at 5 PM PST. This month the ThousandEyes Community is offering two Capture the Flag missions in a single upcoming...
Nesux-FAN-Speed-100%
Facing FAN speed 100% issue in nexus Nexus 93180YC-EX switch.
change Master Switch To slave in cisco Switch
Hello everyone, I have two cisco 3750 switches that are on stack with the below config Switch# Role Mac Address Priority State--------------------------------------------------------*3 Master 0017.5ae7.d500 1 Ready4 Member c062.6b8c.f200 1 Readyi wou...
Swithc oonfig
I am using a 3750 switch and going through a Sidewinder G2 firewall. Thefirewall only has its startup config on it with and Internal IP address (.1)which will be the internal gateway. My switch has VLAN2 config of .2. I can ping from my switch to the...
Need help on how to setup static routing Using CBS350
Hi, I'm trying to configure a connection between 2 house network as in the image and I need help on how to configure the switch to make all device able to connect to device on the other network. I've check both router and see static routing menu on w...
| User | Helpful Count |
|---|---|
| 69 | |
| 44 | |
| 37 | |
| 35 | |
| 33 |
| User | Count |
|---|---|
| 32 | |
| 17 | |
| 11 | |
| 11 | |
| 10 |
