Networking

Collaborate with peers and Cisco on all aspects of your network, including Cisco Digital Network Architecture (DNA), routing, switching, and more.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 

Browse the Community

Cisco Catalyst Center

This community is for technical, feature, configuration and deployment questions. For production dep...

2109 Posts

NFVIS Solutions

Join peers and Cisco experts to discuss Cisco’s Network Function Virtualization (NFV) products and s...

12 Posts

SD-WAN and Cloud Networking

Join this community to interact with your peers and Cisco about SD-WAN and all things related to sec...

2063 Posts

Switching

Discuss Catalyst brand switches with peers and experts.

105355 Posts

ThousandEyes

Join us for information about our use cases, common troubleshooting, discussions, getting started gu...

125 Posts

Activity in Networking

Not seeing debug dot1x or mab event log entries on IOS-XE machines.

Hello all,20+ years ago I used debug all the time, however not so much so in the last decade. Seems like last time I called TAC on the 3850 debug command they gave me some silly answer that debug was a Cisco TAC command.  WFIW All the Cisco.com debug...

wags by Level 1
  • 68 Views
  • 1 replies
  • 0 Helpful votes

Resolved! ASA Firewall Interfaces Issues (FIREPOWER2100)

Hiin the office where I work, we have an old Firepower 2100 firewall with 16 interfaces,8 ethernet and 4 fiber. So far we have only used 2, one inside and one outside.Now I need to add a server on another ethernet port to be able to reach it via ipse...

only test email is send in cisco DNA

I configured cisco dna to send emails as soon as aUser Defined Issue Notification is triggered, configured SMTP, performed the sending test and got the email as expected.But all SYSLOG events that were configured with the subscription for email do no...

Dhcp server with vlan's

Hello, I can't manage to give the connected PCs an ip through the dhcp server. My packet tracer + network design are attached. Have currently only started on the bottom part so it's only about the bottom PCs.Thanks in advance for the effort

TS40 by Level 1
  • 55 Views
  • 0 replies
  • 0 Helpful votes

Cisco ACS - 802.1x Radius Issue

I have a less then a dozen Cisco 3850 switches that I am working on.  I need to configure 802.1x authentication.  The issue is the switches are reaching out to Cisco ACS and I need to set up radius server to enable 802.1x.  The Cisco ACS I found out ...

John N by Level 1
  • 218 Views
  • 6 replies
  • 0 Helpful votes

Cisco Router C891F IKEv2 Site-to-Site Setup

I have recently taken over a site that utilizes a Cisco Router to act as their public facing device/firewall. I have been tasked with setting up a IKEv2 S2S tunnel with one of our external vendors, and it will need to be setup on this router.I have w...

IWSup by Level 1
  • 251 Views
  • 12 replies
  • 0 Helpful votes

Nexus 5k vPC pair connecting to VxRail nodes

First I'll state i also have an open case with Vmware.  I inherited a vPC pair that had a number of vPC set up, but the multiple links to the VxRail host nodes were trunk links.  We lost the secondary so only the trunks to the primary vPC were up.  A...

Track Clients

In Prime Infrastructure, we were using the "Monitor / Monitoring Tools / Clients and Users" Track Clients feature for missing or lost devices.1.  Is there a way to export that list of MAC addresses to use in DNAC?2.  How do we add MAC addresses that ...

Mike Garb by Level 1
  • 50 Views
  • 0 replies
  • 0 Helpful votes

Looking for snmp configuration for cisco N540x router

Hi All,Looking for snmp configuration for cisco N540x router.I got information in cisco docs.But configuration bit confuse.Can someone please send me actual command to configure snmp in cisco N540x routerThanks,Prashanth 

vpn missing route

Hi! Can you help me with troubleshoot, I don't know where I am wrong?I don't see on BUH2, route from BUH1 (81.1.210.0/24).I attached config from BUH1, BUH02, ClinicaA01, ClinicaB02, P0.

i_hanu by Level 1
  • 60 Views
  • 0 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Share your Expertise

Level up by answering questions in your area of expertise.