Networking

Collaborate with peers and Cisco on all aspects of your network, including Cisco Digital Network Architecture (DNA), routing, switching, and more.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 

Browse the Community

Cisco Catalyst Center

This community is for technical, feature, configuration and deployment questions. For production dep...

2108 Posts

NFVIS Solutions

Join peers and Cisco experts to discuss Cisco’s Network Function Virtualization (NFV) products and s...

12 Posts

SD-WAN and Cloud Networking

Join this community to interact with your peers and Cisco about SD-WAN and all things related to sec...

2062 Posts

Switching

Discuss Catalyst brand switches with peers and experts.

105350 Posts

ThousandEyes

Join us for information about our use cases, common troubleshooting, discussions, getting started gu...

125 Posts

Activity in Networking

IOS Patch Image failed to be Installed.

Hello Team,I'm facing a challenge to apply a patch on the Cisco ISR4331. See the below error message from the router. SIMBA-RT#install add file bootflash:isr4300_cpld_update_v2.0.SPA.bin activate commitinstall_add_activate_commit: START Wed Mar 27 11...

dissai by Level 1
  • 99 Views
  • 6 replies
  • 0 Helpful votes

📱*{+1-888-829-0881} How do I communicate with Latam 𝖠irlines?USA

To talk to a Latam's live 헿헲헽헿헲혀헲헻혁헮혁헶혃헲 in a quick time, you can initiate a request in several ways. You can call their dedicated customer service line at “ +ퟏ-ퟖퟖퟖ-829-ퟎퟖퟖퟏ // +ퟏ-ퟖퟖퟖ-829-ퟎퟖퟖퟏ} (No Wait Time),” start a chat, utilize email support, an...

ANSIBLE BACKUP ON CISCO

Hello Guys,Below playbook is not working, kindly assist look into it and advise. Thanks.Getting below error :-What could I be doing wrong?

fmugambi_0-1711445454310.png fmugambi_1-1711445510456.png
fmugambi by Spotlight
  • 388 Views
  • 14 replies
  • 0 Helpful votes

Tacacs server configuration problem

Greeting everyone! There is a little problem with configuring tacacs server on ws-2950-24 model switch. The rest switches we have are 2960 series, also 3xxx series and others, more modern versions. We always configured tacacs server this way:tacacs-s...

Networking

Hi everyone, I have a Cisco catalyst C1200-24P-4X switch, and I want to enable stacked VLAN configuration on it. Does it can support the feature?

moges1 by Level 1
  • 74 Views
  • 0 replies
  • 0 Helpful votes

Looking for snmp configuration for cisco N540x router

Hi All,Looking for snmp configuration for cisco N540x router.I got information in cisco docs.But configuration bit confuse.Can someone please send me actual command to configure snmp in cisco N540x routerThanks,Prashanth 

ASA5506-X simple setup NOT understanding HELP

I’m not sure if I’m posting this in the right spot; I’m new to this needing help with setup of a device. I’ve been trying and failing at setting up my 5506. I have a few questions I think if I can get cleared up I can maybe get this working. Please h...

Dot1x Configuration in WS-C2960X-24TS-LL

I have Configured the 802.1x Configuration in WS-C2960X-24TS-LL Switch Globally. when i test the aaa test it was successful. but when i tried to configure in the Interface the authentication was not happening. so can you please help to configure the ...

Resolved! Nexus 3172TQ - Access ports seem not to accept vlan tagged traffic

Hi,I set up vlans, interface vlans with IPs, access ports, link aggregations and trunk on my Cisco 3172TQ.I also set up a linux machine as a test machine to check the configuration.If I send tagged traffic to the access ports of the switch, it seems ...

urbaman by Level 1
  • 445 Views
  • 4 replies
  • 5 Helpful votes

Resolved! Cat 9000v and 802.1X / MAB support

Hello, CML (Cisco Modelling Lab) 2.5 announced a virtual Catalyst 9000 running IOS-XE 17.10 - I tested this out on my personal CML 2.6.1 and I am struggling to get 802.1X working. I know Cat 9K virtual is still a beta release and the CML folks can't ...

Anyone help me with this topology

1. Make end to end connectivity first. 2. Block the network for these site   1)Make sure that Site 4 will not advirtise any network to Site 5 which it receiving from Site3 routers.  2) On site 5 , when we check routing table of R2 router,  it dont ha...

1111111111111111111111.png

Loading an IOS on a switch via Xmodem

A very good evening to all!There are times when the IOS on a switch may crash and (as a last resort) you need to use the painfully slow Xmodem transfer to save your life. I bought a 3550 a while back and that is precisely what happened with me. Witho...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Share your Expertise

Level up by answering questions in your area of expertise.