The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
I understand that when implementing configuration changes from vManage to cEdge/vEdge, the changes are made via NETCONF.However, even if no allow-service netconf is set under Interface tunnel, the configuration can be changed without any problem.Why ...
Dear members,Kindly I would be really thankful if you can please share the plan/links to learn Cisco Enterprise Contact Center. what could be the best material to follow to have a study plan.Regards,Malik
Hello everyone,I have Cisco WLC 5508 with 120 Access Points Supported.I know this WLC is End of Life and End of Support.Now I need to add more AP to the WLC, but I need to buy AP Adder License.My question: Is Cisco still provide AP Adder License so I...
There seems to be some kind of issue going on with the WLC (Cisco 5800 series) my organization uses. I am unable to configure new APs and the current APS are all disassociating from it. Any idea what's going on here???
Rtr1 ----Cost1-----> Rtr2 (Area13)Rtr1 ----Cost1-----> Rtr3 (Area13)Rtr2 ----Cost10----> Rtr3 (Area10)Rtr2 ----Cost10----> Rtr4 (Area0) If i redistribute static route on Rtr2 then Rtr3 learns best route from Rtr1If i redistribute static route on Rtr4...
Any way to reduce CSR1000v load on CPU in EVE-NG? It is very CPU Intensive and increases the temperature very much. I need to lab SR and I know of no other image for regular IOS or IOS-XE that supports that.
Hi,I am getting the CDR error like below 10021 There are no matching recordsVerified under service parameters , cdr flag enabled True Please helpCUCM 11.5 Thanks
We are trying to use PLINK to export a list of active AnyConnect users via TFTP to a text file that's then parsed and displayed via HTML.We use a batch file with the following contents that calls a text file containing the required commands:plink -ss...
We recently had an issue where the HA was out of sync.We broke HA and resarted the servers in proper order and re-established HA.Verified the BDs were happy. Now we find that our persistant chat rooms are missing in the jabber clients. BUT..... It on...
I had booked an appointment for the SD WAN exam on 28-04-2024, then 23-04-2024 i rescheduled my exam to 30th-04-2024. Unfortunately, i cannot see my appointment, what could be wrong?
Would it make sense to use a firewall for a 10 gbps layer 2 link between 2 sites? I'm thinking using a firewall for a 10 gbps connection would be very expensive. Is it worth it?
Hi all,I have locked myself out of the switch, more specifically, I can't enable. Every method of password recovery I have tried has failed. I do not know how to factory reset my two stackwise-enabled switches. I need a password recovery procedure th...