pix to concentrator looses connection , how can I reestablish

bgleason · ‎01-31-2007

I have a pix 506 that has a ipsec tunnel to a 3030 concentrator. When the session drops about once a month. I have to reboot the pix. Can we setup a timer or some criteria for the tunnel to reconnect one the interesting traffic tries to traverse the tunnel.

What can we do on the pix side to recreate the tunnel

thanks

bbaley · ‎02-06-2007

check NAT 0 and ACL's are configured perfectly in PIX .

Try these links for more info:

http://www.cisco.com/warp/public/707/ipsec_debug.html

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_tech_note09186a0080094eca.shtml

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a008009448c.shtml