cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1595
Views
0
Helpful
9
Replies

Http enabled on 3650 switch

hambone8204
Level 1
Level 1

I'm uploading a new image to a 3650 switch from c3560-ipbase-mz.122-25.SEB4 to c3560-ipbasek9-mz.122-25.EB4.bin image and now I can't brouse the switch but before the uplad I could...any sugestions?

9 Replies 9

bjw
Level 4
Level 4

I found the k9 image adds some different defaults to a few things, ip http server/secure-server to name a few.

Take a look at the running-config and look for a line spelling out http authentication, set it to what you want, confirm ACLs not killing you, or local auth when none is configured, and of course the IP general set up.

It's right out of the box..No ACL etc, See file.

version 12.2

no service pad

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname Switch

!

!

no aaa new-model

ip subnet-zero

!

no file verify auto

spanning-tree mode pvst

spanning-tree extend system-id

vlan internal allocation policy ascending

!

interface FastEthernet0/1

!

interface GigabitEthernet0/1

!

interface GigabitEthernet0/2

!

interface Vlan1

ip address 192.192.192.1 255.255.255.0

!

ip classless

ip http server

ip http secure-server

!

!

control-plane

!

line con 0

line vty 0 4

no login

line vty 5 15

no login

!

!

end

Switch#

glen.grant
VIP Alumni
VIP Alumni

Did you get the tar file image , this has the needed html files , if you just downloaded the .bin file it probably won't work .

Ahh, No I didn't get that file..where can I?

Cisco Software center - http://www.cisco.com/public/sw-center/

But you'll need a CCO account.

will look like something like this c3560-ipservices-tar.122-25.SEB4.tar .You then hav to use the archive command I believe , not real familiar with this as we never use the HTML web based mgt. feature , CLI only.

Thanks for this info.. I'll see if I can find it..

Yes, I agree on the CLI however, Some of the team member perfer not to ust the Cash Line Interface.. I found the image file and noted once I get it c3560-advipservicesk9-mz.122-25.SEB4? It converts the tar file.. Is that where you mentioned "Archeive command" comes in?

Thanks

The archive command can extract an image directory tree and files from a .tar compressed image file and it can create a .tar compressed image file from a -drwx- image directory tree and files.

http://www.cisco.com/en/US/products/hw/switches/ps5528/products_command_reference_chapter09186a00804765f2.html#wp1859669

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco