02-01-2007 07:38 PM - edited 03-05-2019 02:07 PM
Can I use the following cable and adaptor for connecting the aux port of cisco 1841 ro Modem
1) a flat-satin rolled RJ-45--RJ-45 cable (part number CAB-500RJ= )
2) an RJ-45 to DB-25 adapter marked "MODEM" (part number CAB-25AS-MMOD)
Thanks
02-01-2007 08:56 PM
Hi,
Yes. That's correct.
Refer to the URL below.
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml
Hope this helps.
-VJ
02-01-2007 09:24 PM
02-01-2007 10:27 PM
Thank you very much, VJ
I have checked the document. However, it is not mentioned the cisco 1841, so I would like to confirm if it is work in the router.
Cheer
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide