WS-X6608-E1

MANIVANNAN NAGARAJAN · ‎02-01-2007

Hi,

I am having WS-X6608-E1 module in 6509 cat ios switch. I would like to upgrade from cat ios to native ios.The above mentioned module won't support on native os.could any one can give me the equalent module which support native IOS.

muarrij · ‎02-02-2007

Hello Manivannan,

You can use CMM module and insert up to 3 6 port t1/e1 port adaptors (WS-SVC-CMM-6x1) in them. These use native IOS and allow up to 18 ports per blade. You also have the option of installing a hardware transcoder card on the same blade.

Hope that helps??

muarrij · ‎02-02-2007

Here is the link for the info you require.

http://www.cisco.com/en/US/products/hw/switches/ps708/prod_module_install_config_guide09186a008014f5b1.html

MANIVANNAN NAGARAJAN · ‎02-08-2007

Thanks a ton.

muarrij · ‎02-09-2007

Youre welcome! Please rate helpful posts. Thanks.