02-03-2007 12:00 AM - edited 03-05-2019 02:08 PM
Hi all,
i have tried converting my 6509's existing CatOS {version 8.4} to IOS {12.2}, following the manual process. the 6509 has a Sup2 & an MSFC2.
When i was done uploading the IOS & restarted the switch, the switch would boot normally, but the RP would crash & generate crash info file in the switch's flash. i am wondering if anyone has experienced such a case.
thank you,
-Mohamad.
02-03-2007 04:49 AM
I have done this succesfully in the past.
The procedure is described in:
Goodluck!
Regards,
Leo
02-21-2007 10:52 AM
I have the same situation with 6509 Sup2/MSFC2. It works fine with Hybrid, but when I'm trying to upgrade it to the native IOS the SP boots perfectly but RP crashes:
00:00:01: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:01: %C6MSFC-3-NOCPUVER: Invalid CPU ID 9999. System crashed to ROMMON
00:00:02: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
00:00:02: %OIR-6-CONSOLE: Changing console ownership to switch processor
I've tried to update RP rommon, to change the IOS version - no luck. It's always the same problem (%C6MSFC-3-NOCPUVER).
Any ideas?
02-22-2007 01:52 AM
Hi,
i have escalated this issue to a Cisco partner. i should get an answer within a couple of days, and i'll keep you posted.
07-10-2007 07:17 PM
did you get any answer from cisco?
same problem here
07-12-2007 05:27 AM
Hi Soheil,
actually i did not; this case remains unsolved. let me know if you get to the bottom of it.
thanks,
-Mohamad.
11-25-2008 05:11 AM
Same issue faced while trying to upgrade the MSFC.
Any suggestions!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide