DEAD 2940?

Unanswered Question
Feb 3rd, 2007

Not really dead, but just made the mistake of erasing the flash and NVRAM. Anyways, I am fairly new to networking, and I am trying to load the IOS to the flash. How do I do that? TFTP server? What is the actual, step by step command?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
sachinraja Sat, 02/03/2007 - 16:28

Hello,

Is the switch on rommmon mode now? If so, you can use the xmodem commandsets to upload the IOS through the hyperterminal. You have to be on the console of the switch for this. you can then use the command :

xmodem -c imagename 115200

where 115200 is the speed at which the upload will happen..

Refer to this link for more info:

http://cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml

Hope this helps.. all the best... rate replies if found useful..

Raj

sachinraja Sat, 02/03/2007 - 16:35

Test it and let us know in case of any issues.. if it works, mark the case as solved, which can help others.. rate replies if useful.

Raj

Actions

This Discussion