02-04-2007 11:01 PM
Hello,
Our vpn to a client is not working. This error message was log in our syslog server. Thanks
02-04-2007 22:59:51 Local0.Error 172.22.14.254 Feb 04 2007 13:54:45: %PIX-3-305005: No translation group found for udp src inside:172.22.212.217/500 dst outside:63.172.xx.xxx/500
02-04-2007 11:05 PM
Hi,
This is a NAT problem.
You need to make sure you have NAT 0 in place ro traffic between vpn pool and local LAN (nat 0 (inside) acl NAT0), and NAT/PAT from the vpn pool to external public IPs (nat (inside), global (outside)).
Please rate if this helped.
Regards,
Daniel
02-04-2007 11:19 PM
This is how our network is layout.
CISCO 1760>LAN>PIX515 INTERNET > Eclipse SUPPORT software vendor.
This cisco 1760 router has only one interface. This was only for support to get in to our network. I already have the nat (inside) 0 use for the remote VPN user. Is it ok to use nat (inside) 1 for this router? I am new to this. Thanks in advance.
02-04-2007 11:36 PM
Hello,
I added a nat (inside) 10 0.0.0.0 0.0.0.0 0 0
now I am getting a different error. something no route to 172.22.14.10 from 65.124.xxx.xxx.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: