02-05-2007 01:10 AM - edited 03-11-2019 02:29 AM
Hi
I have a pair of asa5520 configured as active/standby failover pair.
I have a requirement to carry UDP video conferencing sessions through my firewall.
During testing I made a video call from a unit on the inside to the outside. The call establishes fine.
I then Fail and interface on the active/Primary unit, the standby becomes active and the remains up (image freezes for 5 secs, which is fine).
If I reconnect the interface on the primary, wait a minute or two and fail an interface on the active/Secondary unit, the call freezes for 5 secs and then resumes.
After approx 60 secs running on the active/Primary the call drops?
I this right?
The video call is a standard H323 call using Tanberg units.
02-05-2007 10:56 AM
Can you post your failover config ? Failover should be stateful for H323.
02-06-2007 12:43 AM
It works fine when I turn off the h323 inspection rule
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide