02-05-2007 01:53 AM - edited 03-14-2019 07:51 PM
Hi all,
I have configured a 3800 router and the call Manager 4.0
I have DID configured but i rather use connection plar opx for the direct line.
when i call from outside (21202285) it gets alright to the extension (5200).
I want only the user of extension 5200 to use the number 2122202285 to dial outside.
Can u help?
Thanks
Solved! Go to Solution.
02-05-2007 10:22 AM
My bad, at times I'm too focused on the CME.
The below works with both CCM and CME:
http://cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
Please rate all post especially the useful ones.
02-05-2007 02:37 AM
One method (there are others), is the trunking support for ephones:
Please rate useful posts.
02-05-2007 03:39 AM
Hi
Thanks for the reply.
The documentation on the link is about CME
I have a CCM not a CME.
and the 3800 router is my Voice Gateway.
I will appreciate any additional help.
02-05-2007 10:22 AM
My bad, at times I'm too focused on the CME.
The below works with both CCM and CME:
http://cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
Please rate all post especially the useful ones.
02-09-2007 04:42 AM
Hi Bevilacqua,
This was really helpful.
My problem has been solve.
Thanks
Eric
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: