02-06-2007 05:22 AM - edited 03-05-2019 02:11 PM
Dear Friends
We have a Cisco Catalyst 4503 With one 6 x gbic based module and one 24 x rj-45 based module.
The software version and image are
Version 12.2(20)EW
cat4000-i9k91s-mz.122-20.EWA3.bin
Now we want to do the input and output rate limiting on each port.
Can anyone provide an example of the configuration on how to do that?
Thanks in Advance
02-12-2007 06:41 AM
If both ingress and egress policing is applied to a packet, the most severe decision will be taken. That is, if the ingress policer specifies to drop the packet and the egress policer specifies to mark the packet down, the packet will be dropped.
http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00800946e9.shtml
02-21-2007 04:34 AM
Thanks for your reply.
I'm also interested in traffic shaping if you know link to a document please tell me.
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide