02-06-2007 08:38 AM - edited 03-18-2019 06:54 PM
Hi, everyone
I'm working to upgrade callmanager from 4.1(3) to 5.1(1). but I don't make a DMA-backup files.
I got those errors:
12:22:51 PM] Process ended ExitCode = -1073741819, modExportDatabase = Failure
[12:22:51 PM] ErrHandler: Err.Number=0 modExportDatabase = Failure
[12:22:51 PM] modExportDatabase = Failure
[12:22:51 PM] modExportDatabase=Failure
[12:22:51 PM] Could not complete database processing successfully.
[12:22:51 PM] Error in modExportDatabase: 0
[12:22:51 PM] Closing process handle...
[12:22:51 PM] CCM2 DB export DLL complete. Return string = Failure
[12:22:51 PM] Failed to verify Cisco CallManager database and directory backed up data.
[12:22:51 PM] The database and/or directory cannot be migrated as they are.
[12:22:51 PM] Correct the database and/or directory information and run DMA again.
[12:22:51 PM] Error in modVerifyCCM: 0
[12:22:51 PM] Verification of DB in IDS failed. Retaining the TAR file as it is.
Thanks in advance,
Ruben
03-20-2007 10:31 AM
Hi Ruben,
could you tell me if you ever resolved this issue as I'm experiancing the same errors while using the DMA tool on 4.1(3).
Thanks,
Chris
03-21-2007 03:37 AM
Hi,
yes, the problem is solved... You should look at the following file carefully to see which the error is:
c:\CiscoWebs\DMA\bin\datavalidation.log
Regards,
Ruben
03-27-2007 07:53 AM
We have this error but no c:\CiscoWebs\DMA\bin\datavalidation.log
created ?
How did you solve this ?
03-20-2007 02:11 PM
Ruben,
Please take a look at this bug. CSCsg56433. Looks very similar to the output you have on the post.
The bug seems to have a status of resolved, but an explanation of how to fix it is not mentioned. Your best bet is to re-run the DMA and see if it helps. If not call TAC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide