H323 gateway configuration with E1 PSTN

Unanswered Question
Feb 7th, 2007

Hello,

can somebody help me with a configuration template/example for a H323 gateway that is connected to the PSTN via an E1 controller.

Thanks in advance!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
royalblues Wed, 02/07/2007 - 06:20

Friend

what are the digits that will be sent to you by the provider

here is a sample config

card type e1 1 1 (required for 2Gen cards)

controller E1 1/0

framing NO-CRC4 (will depend on ur service provider)

pri-group timeslots 1-31

isdn switch-type primary-net5

dial-peer voice 1 pots

destination-pattern 9.T

incoming called-number .

direct-inward-dial

port 1/0:15

!

dial-peer voice 2 voip

destination-pattern 800 (will depend on the digits sent)

session target ipv4:

Also you will have to use a translation pattern to translate the digits that are sent by ISP to your extension range

HTH

Narayan

Actions

This Discussion