1100 errors

Unanswered Question
Feb 7th, 2007


I update my 1100 AP from wireless B to

Wireless G

And now it requiring a 5501.img file

Interface Dot11Radio0, no radio firmware file (flash:/c1100-k9w7-mx.123-4.JA1/5501.img) was found

When I try to download it the Cisco do not give for me permition

When I try to upgrade IOS it does not work properly

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
csannedhi Mon, 02/12/2007 - 13:40

Well, upgrade of hardware (from B to G) shouldn't require firmware upgrade. Any way, if you need to upgrade the firmware go for the TFTP server based upgrade. This procedure is explained at http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184ad5.html#1038660

Cisco is not letting you download the firmware because your contract is not renewed. They will refuse to replace the unit also in case of major lockup during upgrade.

Good luck.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode