Router 1811

KlediBodinaku24 · ‎02-07-2007

I see that this router has 2 interfaces 10/100 and also an 8 port switch.

I was wondering if it is possible that this switch may be splited in VLAN-s and one interface may be used as Router on a stick?

Also, there is one more slot for an additional interface. Can this slot accept an ethernet interface so i can get another network?

What type of card would it be?

Regards

spremkumar · ‎02-07-2007

Hi

Cisco 1811 belongs to fixed model family of 1800 series boxes.

You wont be able to add any additional card to the router.

But you can create a maximum of 8 vlans on the router ..

for more info on the same do refer the below link..

http://www.cisco.com/en/US/products/ps5853/products_data_sheet0900aecd8028a95f.html

regds

KlediBodinaku24 · ‎02-09-2007

Does this mean that i can use each port of the switch as a sub interface.

For that do i have to configure one of the FE ports as Router on a Stick and connect to the switch, or this Router can use each of these switch port as a sub interface and i can use the FE ports for other networks?