3620 RAS

Unanswered Question
Makarand Chitale Wed, 02/07/2007 - 13:32

A dialup session will disconnect at the end of dialer idle-timeout provided there is no interesting traffic for that specified time transiting over the connection, further the interesting traffic is defined using "dialer-list" command and bound to the asyn interface using "dialer-group" command.

An example:

interface Group-Async x

dialer in-band

dialer idle-timeout 1800 << 30 mins

dialer-group 1

group-range x xx

dialer-list 1 protocol ip permit or anything similar to specify interesting traffic.

More detailed explanation can be found at:

http://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a0080094eb7.shtml

Thanks,

Mak

Actions

This Discussion