priority class in LLQ

Answered Question
Feb 7th, 2007

hello,

if LLQ configured this way:

class-map match-all VOIP

match input-interface FastEthernet0/0

policy-map VOIP

class VOIP

priority 128

class class-default

fair-queue

lets say there is 256k bandwidth.

my question is:

- if there is voice traffic, would the VOIP class starve the bandwidth up to 128k?

- if there is no voice traffic, would the default or other class share the bandwidth in VOIP class?

I have this problem too.
0 votes
Correct Answer by spremkumar about 9 years 7 months ago

Hi

If you have voice traffic then your 128K will be used and the remaining bandwidth will be left free for the other clasess.

If you dont have voice traffic then the other classess will be able to utilise the full available bandwdith on the wire.

regds

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
spremkumar Wed, 02/07/2007 - 22:16

Hi

If you have voice traffic then your 128K will be used and the remaining bandwidth will be left free for the other clasess.

If you dont have voice traffic then the other classess will be able to utilise the full available bandwdith on the wire.

regds

Actions

This Discussion