02-08-2007 01:08 AM
Hello,
I wonder if anybody's has actually tried to follow the 'ACE getting started' guide, just to setup a VIP and 2 http servers. I really did follow the instructions, but many of the commands from the docs are not even accepted by the ACE.
Could somebody provide me with a working example of an ACE and 2 http servers.
Many thanks.
02-08-2007 01:25 AM
I just checked the config guide @ http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a00806853d2.html
and all the steps are correct except step #10.
Instead of
"loadbalance L7_VIP_LB_ORDER_POLICY"
you have to type
"loadbalance policy L7_VIP_LB_ORDER_POLICY"
The rest is correct.
Gilles.
02-08-2007 01:58 AM
Hey, I'm sorry, I forgot the put a default route to the ACE on my servers. It works now.
Still, there are a couple of things that didn't work in the guide :
toward the end of the page, when the complete configuration is displayed, I think the server farm is missing, and there are other commands that are not accepted.
Then I followed this :
It works better but there is also some problems :
in VIP With Connection Parameters Example
look for :
host1/Admin(config)# policy-map multi-match L4_SLB_POLICY
host1/Admin(config-pmap)# class VIP
the class vip doesn't exist;
I can not go through the docs and spot all the little problems but I think there are more.
thanks anyways,
Lionel
02-08-2007 05:59 AM
Lionel,
I sent your comment to our document writers.
Gilles.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: