02-08-2007 12:05 PM - edited 03-14-2019 07:56 PM
Hello all. I'm struggling to get the above working. I am successfully using backgrounds on my 7911Gs, but using the same method on the 7941Gs and 7961Gs doesn't work.
My list.xml file for the 7941Gs and 7961s is:
<CiscoIPPhoneImageList>
<ImageItem Image="TFTP:Desktops\320x196x4\TN-MyTest.png"
URL="TFTP:Desktops\320x196x4\MyTest.png"/>
</CiscoIPPhoneImageList>
Obviously, I have put the two .png files in the folder located at: C:\Program Files\Cisco\TFTPPath\Desktops\320x196x4
The phones display 'File not found' - any ideas? Incidentally, the 7911Gs which do work have the list.xml set as:
<CiscoIPPhoneImageList>
<ImageItem Image="TFTP:Desktops\95x34x1\TN-Test.png"
URL="TFTP:Desktops\95x34x1\Test.png" />
</CiscoIPPhoneImageList>
This file, along with the .png files are located at: C:\Program Files\Cisco\TFTPPath\Desktops\95x34x1
Am I right in saying that there is a separate list.xml for each of the above examples?
I have looked at the Customizing Phones pdf but I think everything is right. Any other ideas guys?
Any help is much appreciated.
02-09-2007 06:37 AM
Hi Darren,
The list.xml example in the 7941g/7961g guide looks slightly different than yours (check the / vs \ )?
List.xml Example
URL="TFTP:Desktops/320x196x4/Fountain.png"/>
URL="TFTP:Desktops/320x196x4/FullMoon.png"/>
Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco CallManager 4.1(3)
Customizing the Cisco IP Phone
Hope this helps!
Rob
02-09-2007 04:54 PM
Remember to restart the Cisco TFTP service after placing new files and make sure that all the servers has the .xml and the .png images.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: