radius vlan attributes? ID vs Name

christopheryoung · ‎02-08-2007

Hi All,

I have a multi vendor wireless network where some of the AP's require the vlan name ( trapeze AP's ) to be returned from the radius server ( ACS ), whereas the Cisco AP's require the VLAN ID ( numerical value) to be returned. Any thoughts as to how we can get the two to interop? Is there any way to get the Cisco APs ( 1200's mostly) to recognize the vlan name?

any suggestions would be greatly appreciated,

thanks!

Chris

bwalchez · ‎02-14-2007

Refer to the Using VLANs with Cisco Aironet Wireless Equipment doc.

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml

Kunal Singh · ‎02-14-2007

Hi Chris,

Yes it is possible. From gui kindly go to

Services> Vlan > Select Vlan from current Vlan and Tag them with Vlan name. And hit on apply.

This will allow you to use both Vlan number and Vlan name .

Thanks ,

kunal