Solved: VG 224 Transfer

twissam · ‎02-09-2007

Hi,

please note that my client have VG224 configured as MGCP gateway with CCM 4.13

currently analogue phones can transfer but in blind mode, could it be possible to do a consultative transfer.

in case yes, how to do it, i could not find any doc on the net.

if i need to change the mode from MGCP to SCCP, it would be no problem.

thanks

Rob Huffman · ‎02-09-2007

Hi Wissam,

According to this VG224 doc, Consult Transfer is supported with SCCP. Have a look;

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html

Hope this helps!

Rob

View solution in original post

Rob Huffman · ‎02-09-2007

Hi Wissam,

According to this VG224 doc, Consult Transfer is supported with SCCP. Have a look;

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html

Hope this helps!

Rob

thilanjayathilake · ‎05-15-2007

Hi

I have configured vg224 with the call manager with SCCP .but stil the call transfering is not working. when i press the flash (Hook flash ) it will not switch to transfering mode

admin · ‎09-15-2007

Probably you should set "Maximum Number of Calls" to the value more than 1.

martin.plank · ‎06-23-2008

Hi,

I've configured 7 VG224 for SCCP, Max. Calls on CUCM5.1.2 ist set to 2, but Call transfer doesn't work. On my VG224 i have SW 12.4

admin · ‎06-25-2008

The one more problem may be incorrect IOS.

In my network I use

vg224-i6k9s-mz.124-4.T2.bin or

vg224-i6k9s-mz.124-9.T.bin

wcarvalh · ‎10-22-2008

Hi guys,

I was having this problem and it was solved setting "Maximum Number of Calls"! Thank's for the tip!