port channelling on 3750 switch stacks

Answered Question
Feb 12th, 2007

I have a stack containing 4 x 3750-48 PoE switches and would like to channel these back to a 6509 over the GigE ports. To allow for resilience I would like to use a GigE port from different 3750 switches in the stack but cant find any commands or documentation on CCO as to how you do this.

Please can you let me know if this is configurable and where I can find this on CCO.

I have this problem too.
0 votes
Correct Answer by glen.grant about 9 years 7 months ago

Its called cross stack etherchannel and it can be done .If you want to use the dynamic channel protocols you must use LACP , not pagp. The switch must be at 12.2.25SEC also to use lacp. This might help .

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00806cb982.shtml

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.

Actions

This Discussion