02-12-2007 04:50 AM - edited 03-05-2019 02:18 PM
I have a stack containing 4 x 3750-48 PoE switches and would like to channel these back to a 6509 over the GigE ports. To allow for resilience I would like to use a GigE port from different 3750 switches in the stack but cant find any commands or documentation on CCO as to how you do this.
Please can you let me know if this is configurable and where I can find this on CCO.
Solved! Go to Solution.
02-12-2007 06:16 AM
Its called cross stack etherchannel and it can be done .If you want to use the dynamic channel protocols you must use LACP , not pagp. The switch must be at 12.2.25SEC also to use lacp. This might help .
02-12-2007 06:16 AM
Its called cross stack etherchannel and it can be done .If you want to use the dynamic channel protocols you must use LACP , not pagp. The switch must be at 12.2.25SEC also to use lacp. This might help .
02-12-2007 08:00 AM
thank you for this. This is exactly what I need to do
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide