02-13-2007 07:03 AM - edited 03-03-2019 03:44 PM
Hi Guys:
I have a problem with my show access-list details.
Im using a named access-list.
buts i could not find the acl line number with the show command
Normally my other Router shows below:
Router#show access-list
Extended IP access list 110
1000 permit ip host 10.200.9.21 any
1001 permit ip host 10.200.9.38 any
But my other router shows below:
Router#show access-list
Extended IP access list 110
permit ip host 10.200.9.21 any
permit ip host 10.200.9.38 any
Is there a setting for displaying acl line number?
Please help..
Thanks
Cliff
Solved! Go to Solution.
02-14-2007 07:14 AM
You need IOS version 12.3(2)T or later to get sequence numbering of extended access-lists.
02-14-2007 06:31 AM
Hi Cliff,
Please let us know which IOS you are using.
I feel it is related to IOS only.
Regards
S. Shantharam
02-14-2007 07:14 AM
You need IOS version 12.3(2)T or later to get sequence numbering of extended access-lists.
02-17-2007 10:35 PM
ahmed,
I guess it is:
The other is 12.2 and the other 12.3. I guess i have to upgrade the other router.
thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: